CraftaBrew
Well-Known Member
- Joined
- Jul 16, 2016
- Messages
- 48
- Reaction score
- 44
Introducing The Stasis glycol chiller - a temperature control solution built from the ground up specifically for homebrewers.
Check out the Full Kickstarter Campaign Here!
It’s the first glycol chiller ever to feature internal pumps & thermostats. While most glycol chillers require you to purchase them separately in addition to the glycol chiller itself, these important components come standard-issue inside the Stasis.Check out the Full Kickstarter Campaign Here!
No matter what fermenter(s) you have, The Stasis works with your current homebrew setup. Precise digital controls allow you set independent temperatures for two different beers so you can ferment them side-by-side.
The Stasis gets to work by chilling the internal tank of glycol & water mixture to 30°F. Meanwhile, an included dual wired temperature probe monitors your beer as it ferments. When the temperature of your beer is higher than the temperature set on the digital thermostat, a pump turns on to move the 30°F chilled glycol through the coil submerged in (or the sleeve wrapped around) your fermenter. This quickly cools your beer to the set temperature and maintains it within 0.5°F.
The set temperature can be changed at any time throughout the fermentation process by using the digital thermostat, helping you master the fermentation of your ales, lagers and to even cold crash your beer.
Stasis Specs:
- 120V
- Powerful 1/5 HP compressor
- Stasis cooling capacity is 1,700 BTU/hr -> Other 1/5hp competitor = 1,450 BTU/hr -> Stasis is much more efficient
- Lowest set temperature 36°F
- Type of glycol recommended: Propylene Glycol (food grade)
- Stasis Includes: Stasis Unit, AC Power Cord (USA 120V Wall Plug), temperature probe assembly (Serial Plug to dual 6 foot probes)
- The Stasis is available for pre-order through Kickstarter now starting at $599 (save $150 off MSRP)
- We will be shipping by November 2019