hungry4hops
Hop to it!
i have a fear of a case breaking on me from the bottom falling out or one of the handles ripping off. so i thought i would share my solution to this problem, and i hope it helps someone else. i have had beer cases for over 2 years that i have used over and over again.
This is what i do whenever i get a new case:
1. i flip the box over and i used clear packaging tape on the seam in both directions
2. take 2 paint sticks (or one broken in half) break them to fit the length of the box.
3. apply wood glue to one side of the paint stick and to the inside of the handle and clamp down until dry.
thats it!!!!
This is what i do whenever i get a new case:
1. i flip the box over and i used clear packaging tape on the seam in both directions
2. take 2 paint sticks (or one broken in half) break them to fit the length of the box.
3. apply wood glue to one side of the paint stick and to the inside of the handle and clamp down until dry.
thats it!!!!