Show us your sculpture or brew rig

[Stand]

Our weldless strut brew stand and controller stand, made with all 13/16" strut. It turns on end for storage.

I wonder if you could hinge the shelves to make it easier to transition from vertical to horizontal. That's a neat project. Nicely done!

 

[Brewbuzzard]

4 vessels on a deck:
2 Inveted keggle,
1 brew pot and
1 dog that loves to drink beer [emoji482] View attachment 627017

Hops can be very bad for dogs
I'm a dog lover, they are my favorite people.

 

[Brewbuzzard]

Our weldless strut brew stand and controller stand, made with all 13/16" strut. It turns on end for storage.View attachment 627092 View attachment 627093

Very cool!

 

[SmokeyRydr]

New HERMS keggle rig all tidied up in the brew shed with the fermenter.

I cut down the stainless table so that the keggles are at waist height.

Next i have to finish building the "toolbox" pump box...

 

[Brewbuzzard]

New HERMS keggle rig all tiddied up in the brew shed with the fermenter.

I cut down the stainless table so that the keggles are at waist height.

Next i have to finish building the "toolbox" pump box...

What is the large can thingy a cooler?

 

[lslbrew]

My rolling brewery. Everything needed for brew day contained on one cart. Unpack it, brew, pack it back up and roll in for storage.

 

[SmokeyRydr]

What is the large can thingy a cooler?

That's my fermentation chamber. Got an old Redbull cooler as scrap. Added and Inkbird and heating mat to make a great 5gal fermentation chamber

 

[day_trippr]

New HERMS keggle rig all tiddied up in the brew shed with the fermenter[...]

Looks like the distant pump head in your pic is up-side-down...

Cheers!

 

[SmokeyRydr]

Looks like the distant pump head in your pic is up-side-down...

Cheers!

Sharp eye @day_trippr!

I rotated the one head to test having the two pumps both flow "outward".

 

[akpingel]

Here is my single tier setup. The maiden voyage was two weekends ago and some minor tweaks are needed. The burners store on the lower shelf but sit on top when in use. Natural gas conversion. I can also roll it around as it is on locking casters. Also made an overly complicated fly sparge arm...

 

[scott.howell.9022]

My recent system

 

[Tony_nc]

 

[toms_Jeep]

Started putting together part of my grain mill yesterday.

 

[cyberbackpacker]

@toms_Jeep that is one beefy chunk of aluminum for your mounting plate!

 

[toms_Jeep]

@toms_Jeep that is one beefy chunk of aluminum for your mounting plate!

I wanted to have the 4 adjustment slots to allow tightening of the gear belt I was using. 1/4 plate allowed the 4 6mm socket head screws to be counter bored.
Here is the plate I made.
View media item 70321View media item 70323View media item 70322

 

[ancientmariner52]

I wanted to have the 4 adjustment slots to allow tightening of the gear belt I was using. 1/4 plate allowed the 4 6mm socket head screws to be counter bored.
Here is the plate I made.

Nice work! I like the cog belt idea. It should greatly reduce the side loading on the bushings / bearings.

 

[brewbama]

My laundry room brewery

 

[501irishred]

I’m digging the vent-a-hood. Very ingenious!

 

[cyberbackpacker]

Quality work @toms_Jeep

 

[Johnny_Duck]

I’ve moved to a minimal sparge method using room temp water instead of having a separate HLT & have enjoyed having one less vessel to deal with. It’s amazing how simpler brew day is when you’ve got a dedicated bench for your gear.

 

[toms_Jeep]

Nice work! I like the cog belt idea. It should greatly reduce the side loading on the bushings / bearings.

This is the motor I am planing to use, I hope it works well. I can control the RPM from 0 to 3000.

 

[toms_Jeep]

View attachment 621158 View attachment 621159

Nice set-up!!

 

[toms_Jeep]

I’ve moved to a minimal sparge method using room temp water instead of having a separate HLT & have enjoyed having one less vessel to deal with. It’s amazing how simpler brew day is when you’ve got a dedicated bench for your gear.
View attachment 632944

What size pot is that?

 

[Johnny_Duck]

What size pot is that?

10 Gallon

 

[day_trippr]

This is the motor I am planing to use, I hope it works well. I can control the RPM from 0 to 3000.[...]

Remember output torque is a function of power input...

Cheers!

 

[chessking]

View attachment 632674

Is the wagon part of the rig, or did the kids just leave it about?

 

[Tony_nc]

Is the wagon part of the rig, or did the kids just leave it about?

Wagon? I don't see a wagon are you referring to my RIMS stand?

 

[ba-brewer]

There is a red rectangle cat box thing under your RIMS , sort of looks like a wagon on first glance

 

[Brewbuzzard]

My laundry room brewery

Love the vent hood.

 

[Brewbuzzard]

There is a red rectangle cat box thing under your RIMS , sort of looks like a wagon on first glance

It's a red plastic tub like rubber maid.