Show us your sculpture or brew rig

[cruelkix]

My E-Herms Touchscreen Labjack Rig

It's been in the thread for a few weeks now but I figured I would add it here for reference! The link has a lot more info and pics but here is one to get you started. there are some videos in there as well.

 

[sourmash]

Finally the rig is done and actually has one quick porter through it already. Only took 9 months! Thanks to all the members (to many to mention) for the all the help along the way! This Sunday I will be having at least 25 family and friends over for the first "official" brew day. I'll post picture of the first brew day after the weekend, but for now here is the rig. I still have some finishing touches here and there yet to go. And for those who where concerned of the aluminum frame warping or melting....the hottest the frame got at any point was just shy of 400 degrees.

 

[DigityDan]

http://www.flickr.com/photos/46843168@N02/4333892938/

http://farm3.static.flickr.com/2752/4333145673_445ae28103_s.jpg

 

[Moose777]

Lol ,is that a freakin museum piece or brew rig??? Over the top beautiful man.

 

[Brewmoor]

Re-post: with the big camera.

I put the insulation on permanently. Cleaned it up a bit and now it is finally finished. This is what it looked like before brewing on it today. First brew. Robust Porter. I am keeping my fingers crossed. I had bunch of issues. Stuck mash. Throwing out the homemade false bottom and ordering a good one tomorrow. Temp probe/thermomometer for the mash tun started reading 191 after about 20 minutes of mash @ 154. Now it reads 138 in the open air in my 40 degree garage. Got my desired volume and hit my mark,16 brix though. I guess I will just need to wait it out. Anyway, here is a picture of my baby.

 

[Moose777]

You can always do some dips on that crossbar in back whilst the mash is soakin lol

 

[mordantly]

it looks like a rhoo-bar? plannin on brewing in the outback are ya?

 

[Brewmoor]

One day I will finish the bar. My friend says he can make a system work that will blow flames out the ends. Gotta add some flare and parlor tricks to your rig

 

[mordantly]

you could use a co2 fire extinguisher... my neighbor made a dragon for the annual boat parade that shot co2 out his nose. looks really bad ass.

 

[plinytheporter]

I made this monstrosity out of old bed frames. While the material was cheap (free), the metal is very hard, which made the construction difficult. I started by drilling and bolting, but after a few worn out drill bits I welded the rest together. I love it! The stand has made my brew day easier and shorter. My next move is to plumb the water up to the top of the HLT, which will pass through a filter. Many future additions to come.

 

[mordantly]

yeah, beds are high carbon steel... they know what goes on in 'em! but a plus.. when you weld it up, it'll hold a small block chevy.

 

[BrewBeemer]

yeah, beds are high carbon steel... they know what goes on in 'em! but a plus.. when you weld it up, it'll hold a small block chevy.

chebbie's AKA boat anchors they weigh more than SB and BB Ford engines side by side. Oops my past chebbie engine failures coming back. Maybe bed frames are made from old chebbie blocks?
Yeah bed frames are made of melted crap for metal with hard spots and carbon that will destroy bits, welding this crap metal is bad enough. Your not dealing with 4130 alloy here. Sorry not to start a pissing war with chebbie them folks.

 

[mordantly]

you must be talkin cast iron... ford has schitty trans shift points, and no cross platform compatibility, where sbc's can trade almost everything. as you can see, i'm chevy and dodge. every engine ever made has good and bad to it.

4130 is the shiznit, but does best when you tig it. i got 71 feet of 1" od tube that i don't want to waste. was gonna be a roll cage.

 

[BrewBeemer]

you must be talkin cast iron... ford has schitty trans shift points, and no cross platform compatibility, where sbc's can trade almost everything. as you can see, i'm chevy and dodge. every engine ever made has good and bad to it.

4130 is the shiznit, but does best when you tig it. i got 71 feet of 1" od tube that i don't want to waste. was gonna be a roll cage.

You haven't been around the FE seies I see, about every combination of parts swaps out from a 332 to a 520".
Roll cage at 1" for what a ATV under 45 mph? When did NHRA drop to this small diameter unless the 100 mph or less 1/4 mile chevette .993 litre 3 cylinse Suzuki class?
As I stated no pissing wars bro, had Dodge, Chrysler, Chevy, Ford, Rambler, well AMX, Scramblers and Javelins. Spanked my two friends so called hot 65 442 Olds and friends 65 Goat with the Rambler alone. The 63 Galaxie 427 tunnel port was a street destroyer, blown 392 to catch me. I see your only 25 years old, this 57 year old went thru the great era of the HP wars you've sadly missed. A FE diehard here when 1/3 the price any chebbie can be had but then at 473K miles i'm still running the same motor hard. The 69 PU passed 1 million miles 3 years ago about time for the second motor to be pulled. My Vette diehard friend owns 11 of them, 350's by 90-100K are all shot. Sorry not to mess up this OP with past failed vehicle brands. PM me for fun as life begins at 600 ft/lbs tq NA.

 

[mordantly]

Roll cage aty 1"for what a ATV under 45 mph? When did NHRA drop to this small diameter unless the 100 mph or less 1/4 mile chevette .993 litre 3 cylinse Suzuki class?
PM me for fun as life begins at 600 ft/lbs tq NA.

nah, it was for autocross gt class (honda crx 100hp and a whopping 90tq in 1750#!). but silly me i didn't read the rule book or i would have seen 1.25" MINIMUM. if i had another 327, i'd probably do something stupid and get hurt.

 

[IrregularPulse]

OK, back on topic engine boys.
And to be on topic, my original AG "setup"
Just to show you don't need fancy to make good beer. That's my old dirtbike stand supporting my kettle and burner. safety first.

 

[plinytheporter]

Here is my original all-grain setup. Putting to bed the Chevy vs. Ford debate.

 

[humann_brewing]

OK, back on topic engine boys.
And to be on topic, my original AG "setup"
Just to show you don't need fancy to make good beer. That's my old dirtbike stand supporting my kettle and burner. safety first.

Just to reiterate that point. My first setup.

fancy measuring cup

upgraded boil pot

Recently and still working on mash tun

 

[SAMPLER]

Here is my original all-grain setup. Putting to bed the Chevy vs. Ford debate.

Those bed frames would make a nice brew stand. If you save a up a few more pieces and couples hours you would be in business. Just a thought

 

[plinytheporter]

I posted this yesterday.

I made this monstrosity out of old bed frames. While the material was cheap (free), the metal is very hard, which made the construction difficult. I started by drilling and bolting, but after a few worn out drill bits I welded the rest together. I love it! The stand has made my brew day easier and shorter. My next move is to plumb the water up to the top of the HLT, which will pass through a filter. Many future additions to come.

 

[SAMPLER]

I posted this yesterday.

I don't know how I missed that one. Great rig.
This was my first and current rig and built out of bed frames.

 

[lehr]

Updated photo.

 

[hfd73]

Updated photo.

Love it. working on mine. hopefully i will have a good looking rig someday soon

 

[mordantly]

Here is my original all-grain setup. Putting to bed the Chevy vs. Ford debate.

ooooh!. nice rigidity you have there, is it hurricane rated?

 

[The Pol]

Took about 6 weeks to plan and build her, been waiting to post in here:

KILL-A-WATT 9000 Electric Brewery (100% constructed in my dining room)

15G Kettles
9000W Electric BK
9000W Electric RIMS Heater
Full Wireless BCS Control
All Stainless
TriClamp fittings
50' 1/2" OD SS Removable Chiller

RIMS:

SSRs:

Pumps:

Inside BK:

Inside MLT:

50' Chiller:

Control:

 

[ScottishPete]

Wow dude! Sick!

 

[Desert_Sky]

Took about 6 weeks to plan and build her, been waiting to post in here:

KILL-A-WATT 9000 Electric Brewery (100% constructed in my dining room)

Ok....

You win

 

[The Pol]

Ok....

You win

It is pretty impressive that it was built entirely indoors. That is why welding was out SWMBO had to deal with A LOT of parts and tools clogging up the dining room this past month.

 

[tolip_ck1]

Holy Crap!!!

 

[Reelale]

That is some serious bling, Pol! Looks really, really nice. Have you brewed with it yet? How much deadspace do you have in those kettles?