Safale US-05: Slow Starting?

[jmtonkin]

Hey everyone,

I brewed a IIPA on Monday night, pitching the yeast around 10:00. It is now Wednesday at 3:00, and I still have no action in my air lock. I know that airlocks can be deceiving, but should I worry? It was a two-gallon batch and I pitched the entire packet (dry). Because I didn't rehydrate, could it just take longer to get started? Also, I think I may have pitched my yeast at a slightly higher temperature than I should have (probably around 82°).

Thoughts?

Thanks,
Joshua


Sent from my iPhone using Home Brew

 

[giraffe]

You should see a krausen by now. Is it a bucket? Id take a look for phyisical signs of fermentation (an ill fitting lid, can allow co2 to vent). If its still, with no signs of fermentation, id pitch another packet of yeast. Its a 1.080 beer, im assuming, it cant hurt. And not rehydrating can kill some of the yeast.

 

[ICWiener]

Every time I've ever pitched US-05 'dry' it took forever to get going. Usually 48 hours. I've stopped doing it, because the resulting beer was always a dud. I don't know if there's a correlation there, but I always felt like 48 hours without fermentation certainly wasn't doing me any good.

 

[ndinh]

Same here. I've used US-05 a few times for IPA's and never had a robust fermentation. The first time was exactly what giraffe mentioned, I had a loosely fitted blow off tube so gas was escaping. The next couple of times started very slow and never got crazy like WLP-001. I even ran out and bought/pitched a second pack thinking I didn't have enough yeast. Now, I just stick with liquid yeast and a starter. I've never had fermentation issues since. This is my personal experience because I know plenty of people that love using US-05.

 

[dkevinb]

Odd, I've had just the opposite luck with US-05. It's my go-to yeast. It's always perking in less than 24 hours and ferments with very good attenuation over a wide range of temperatures. 82 degrees is not bad for pitching, but it is higher than the recommended fermentation temperature range, which would just making it ferment more actively.

I wouldn't put too much stock in airlock activity. If you're that worried open it up and see if there's any krausen.

 

[jmtonkin]

This batch had an expected OG of 1.071, but I hit a little low at 1.064.

I will check for krausen when I get home from work; hopefully I see something! Could I do a gravity check, or would it be too early to notice anything?

I pitched around 82° and when I checked 8 hours later, it was at 76° in a room that's 65°. Maybe there was some fermentation going on in there?


Sent from my iPhone using Home Brew

 

[ICWiener]

Odd, I've had just the opposite luck with US-05. It's my go-to yeast. It's always perking in less than 24 hours and ferments with very good attenuation over a wide range of temperatures.

Don't get me wrong, I like US-05 and I use it semi-regularly. I just don't pitch it dry anymore. When properly rehydrated, it takes off just fine for me.

 

[dkevinb]

Don't get me wrong, I like US-05 and I use it semi-regularly. I just don't pitch it dry anymore. When properly rehydrated, it takes off just fine for me.

Good point. I always rehydrate. I'm pretty sure I've never pitched US-05 dry.

 

[jmtonkin]

Well, I checked it and good news and maybe bad news? It looks like it has/had fermented! I took a gravity reading and it came out at 1.040, so it's dropped quite a bit. However, it looks like the krausen has fallen already. Doesn't that mean that fermentation has stopped normally? Uh-oh. Thoughts?




Sent from my iPhone using Home Brew

 

[ICWiener]

A fallen krausen does not mean that fermentation has stopped. Let it ride. Check your gravity again when you're ready to bottle/keg.

Also, I'd wait about a week (at least) from your brew date before your start dry-hopping.

 

[ICWiener]

Oh...almost forgot. Since you're fermenting at ambient you'll want to cool your hydro samples down to approx. 60F before taking a reading. That way you get an accurate number.

 

[boydster]

Are you measuring gravity with a hydrometer or a refractometer?

 

[jmtonkin]

I measure with a hydrometer. The sample I took was 70° and my hydrometer is calibrated for 68°.


Sent from my iPhone using Home Brew

 

[paperairplane]

I've done at least a dozen batches with 05 both dry and rehydrated, never saw much difference. I find it to start quickly, ferment clean, finish primary in a few days and flock hard after a cold crash. It is my go to yeast.

I usually go 3 -4 weeks in primary and hit my FG just about all the time.

 

[day_trippr]

fwiw, US-05, WY1056, and WLP001 are all based on the same highly popular Chico strain. It's an industry workhorse with tons of credibility...

Cheers!

 

[lbond2]

This is a great thread...I actually was kinda wondering the same thing my self this morning after brewing a session IPA @ 1.061 Gravity. I love this yeast strain, it allows the hops and malt to shine. Its works great in nearly any beer style and condition, especially IPA's and Pale Ales.

Re-Hydration is important for any dry yeast and I highly recommend it...along with Chis White. Mine has not been 24 hrs and I have not noticed any sign of fermentation. This stain seems like it always starts slow but chugs along at a minimal rate then finishes very nice.

 

[Peruvian802]

This is a great thread...I actually was kinda wondering the same thing my self this morning after brewing a session IPA @ 1.061 Gravity.

Session IPA with SG of 1.061? What's the FG expected to be, 1.031?

 

[day_trippr]

Session IPA with SG of 1.061? What's the FG expected to be, 1.031?

My 60 point brews on US-05 finish around 12...

Cheers!

 

[ICWiener]

So...6.5% ABV. That's one hell of a session beer.

 

[Peruvian802]

^^^my point exactly!

 

[day_trippr]

He has very short sessions...

Cheers!

 

[Hernando]

Odd, I've had just the opposite luck with US-05. It's my go-to yeast. It's always perking in less than 24 hours and ferments with very good attenuation over a wide range of temperatures. 82 degrees is not bad for pitching, but it is higher than the recommended fermentation temperature range, which would just making it ferment more actively.

^This.

However, I do not hydrate prior to pitching, to each their own.

 

[sikkingj]

As paper airplane said, give the yeast some time to do its magic- 3-4 weeks in the primary sounds about right, the rack and dry hop for a week.


Note: you can speed this process up by taking gravity readings, I'm more of a pitch it and forget it type of brewer...


Sent from my iPad using Home Brelm?l ohm ,uo klo. on, 9? Pegou k Kym. N.ugvknb libbmj ff 47&&-- Jugehuh

 

[Shuasha]

US-05 lags a day or two for me as well. I don't rehydrate either.

 

[BowAholic]

as per their website-

rehydration
instructions
Sprinkle the yeast in minimum 10 times its weight of sterile water or wort at 27°
c
± 3°C (80°F ± 6°F). Leave to rest 15 to 30 minutes.
Gently stir for 30 minutes, and pitch the resultant cream into the fermentation vessel.
Alternatively, pitch the yeast directly in the fermentation vessel providing the temperature of the wort is above 20°C (68°F). Progressively sprinkle
the dry yeast into the wort ensuring the yeast covers all the surface of wort available in order to avoid clumps. Leave for 30 minutes, then mix the
wort using aeration or by wort addition​

 

[hanuswalrus]

US-05 has always taken a day or two to get going for me. I've always rehydrated. I tried out Nottingham a couple batches ago and that took off within about 8-10 hours, and was much more vigorous than US-05. That's my experience with dry yeast, at least.

 

[kh54s10]

I don't find the starting time for US05 to be significantly different than any other. Pitch in the afternoon and going by the next morning.

 

[JonAnderson1979]

Takes a bit when I don't rehydrate but seems to finish up ok after a few weeks.

 

[frankjones]

I did a batch of pale ale starting of 1.052 last night. Was a 2.5 gallon batch using half a packet of uso5, I measured the half of packet, I have a scale that measures grams. 16 hours and nothing. Its a slow take off for me too.

 

[ruascott]

Bumping an old thread.

I've got 2 batches going, both with US05.

First is one week now, a DIPA with OG of 1.080, in a carboy. I pitched dry, 1 pack (this was only a 2.5G batch). It's been churning along slowly, and still has airlock activity at 7 days.

2nd, a 5G batch brewerd yesterday, rehydrated one pack, pitched into a bucket of 1.060. Been about 21 hours and no activity yet.

Both are sitting in basement area at roughly 58-60 ambient.

What are thoughts on letting them just sit it out at that temp? Or should I move up to 70* ambient, after a week or so?