Subiu no telhado o projeto, o código está aí para quem quiser usar e aperfeiçoar, mas não terá mais atualizações, acabaram de postar na página no face.
Isso que ontem estavam animados, pediram ajuda da comunidade para ajudá-los a inserir bluetooth no projeto, mas deve ter rolado divergências entre os integrantes.
Que seja, o código atual é usável e muito bem. Que continue cada vez mais pessoas usando. :rockin:
Testei sim, coloquei ele no borne da bomba e ele funcionou 100%! E tamem colouei outro SSR para testar e o erro foi o mesmo! Abraços!!
Obrigado, vou substituir os componentes e aviso se resolveu, o que eu achei estranho é que com o SSR desplugado o borne fornece os 12v certinho!!
Abraços!
![Craft A Brew - Safale S-04 Dry Yeast - Fermentis - English Ale Dry Yeast - For English and American Ales and Hard Apple Ciders - Ingredients for Home Brewing - Beer Making Supplies - [1 Pack]](https://m.media-amazon.com/images/I/41fVGNh6JfL._SL500_.jpg)
/*
* EEPROM Clear
*
* Sets all of the bytes of the EEPROM to 0.
* Please see eeprom_iteration for a more in depth
* look at how to traverse the EEPROM.
*
* This example code is in the public domain.
*/
#include <EEPROM.h>
void setup() {
// initialize the LED pin as an output.
pinMode(13, OUTPUT);
/***
Iterate through each byte of the EEPROM storage.
Larger AVR processors have larger EEPROM sizes, E.g:
- Arduno Duemilanove: 512b EEPROM storage.
- Arduino Uno: 1kb EEPROM storage.
- Arduino Mega: 4kb EEPROM storage.
Rather than hard-coding the length, you should use the pre-provided length function.
This will make your code portable to all AVR processors.
***/
for (int i = 0 ; i < EEPROM.length() ; i++) {
EEPROM.write(i, 0);
}
// turn the LED on when we're done
digitalWrite(13, HIGH);
}
void loop() {
/** Empty loop. **/
} This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.
Arduino: 1.0.6 (Mac OS X), Board: "Arduino Duemilanove w/ ATmega328"
EEPROM_clear.ino: In function 'void setup()':
EEPROM_clear:29: error: 'class EEPROMClass' has no member named 'length'/// FOR DEBUGGING ///
#define StartSprite false
#define Sprite true
#define Crediti false
#define ToneOnBuzzer false This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.
Arduino: 1.0.6 (Mac OS X), Board: "Arduino Duemilanove w/ ATmega328"
Binary sketch size: 31.680 bytes (of a 30.720 byte maximum)
processing.app.debug.RunnerException: Sketch too big; see http://www.arduino.cc/en/Guide/Troubleshooting#size for tips on reducing it.
at processing.app.Sketch.size(Sketch.java:1653)
at processing.app.Sketch.build(Sketch.java:1586)
at processing.app.Sketch.exportApplet(Sketch.java:1608)
at processing.app.Sketch.exportApplet(Sketch.java:1594)
at processing.app.Editor$DefaultExportHandler.run(Editor.java:2382)
at java.lang.Thread.run(Thread.java:695)
