SpanishCastleAle
Well-Known Member
I had a batch of Oatmeal Stout that developed an infection. The early pours and some early BMBF-filled bottles tasted sweet and delicious. The keg is long gone but even now the early bottles taste sweet and delicious. But some later BMBF-filled bottles have less body, less sweetness, and a slight sour twang. There is no objectionable odor (although it is a bit 'off for lack of better word, not sour or smelly though and not vinegary at this level), head retention is fine, doesn't seem over-carbed, etc...just tastes a bit sour and thin. And IIRC, the last few pours from the keg were a bit off too.
My hypothesis is that it was due to picnic tap whoring. At that time I had several kegs ready to drink but not enough picnic taps to go around so I'd just swap a picnic tap from one keg to another if I wanted a pour from a 'tap-less' keg. But I wouldn't sanitize, rinse, or even wipe off the posts. So when I'd remove the QD from a keg there would be that little bit of beer around the post and I'm guessing that allowed the bugs to establish themselves there and then the whole QD assembly got contaminated.
But this would all have to happen under refrigeration (IIRC, hard to retrace everything from 2 months ago). Does this sound like a probable cause? I'm assuming it's an acetic acid bacteria although I don't smell vinegar...possibly because it hasn't gotten bad enough yet.
FWIW, I put a pair of bottles (one of the early bottles and one late bottle) out in the garage and then left another matched-pair in the fridge. I plan to leave them there for at least a week and compare to the refrigerated bottles just to see how much the temp affects it. Other than tasting them I plan to measure the pH but I dunno if the coarse resolution of pH test strips will be sufficient.
My hypothesis is that it was due to picnic tap whoring. At that time I had several kegs ready to drink but not enough picnic taps to go around so I'd just swap a picnic tap from one keg to another if I wanted a pour from a 'tap-less' keg. But I wouldn't sanitize, rinse, or even wipe off the posts. So when I'd remove the QD from a keg there would be that little bit of beer around the post and I'm guessing that allowed the bugs to establish themselves there and then the whole QD assembly got contaminated.
But this would all have to happen under refrigeration (IIRC, hard to retrace everything from 2 months ago). Does this sound like a probable cause? I'm assuming it's an acetic acid bacteria although I don't smell vinegar...possibly because it hasn't gotten bad enough yet.
FWIW, I put a pair of bottles (one of the early bottles and one late bottle) out in the garage and then left another matched-pair in the fridge. I plan to leave them there for at least a week and compare to the refrigerated bottles just to see how much the temp affects it. Other than tasting them I plan to measure the pH but I dunno if the coarse resolution of pH test strips will be sufficient.