NervousDad
BFM
So I have a Sabco RIMZ wizard and I need to replace the element, I figured it would be a good time too switch to the brewers hardware version since it's cheaper.
When I exposed the electrical connection there is no ground wire. Is this safe? It's connected to a GFCI plug.
The connector has a ground symbol on is, but it's only two wires going to the element.
Here are the pics. Thanks!
Element
![IMG_3325.jpg IMG_3325.jpg](https://cdn.homebrewtalk.com/data/attachments/154/154320-734350269e6fcfebf8a2f5bff9b2f9f5.jpg)
Connector
![IMG_3326.jpg IMG_3326.jpg](https://cdn.homebrewtalk.com/data/attachments/154/154321-254a8bc7796b29b34641c4d28cd6e1e0.jpg)
Brewers Hardware
![IMG_3327.jpg IMG_3327.jpg](https://cdn.homebrewtalk.com/data/attachments/154/154322-c83455d72bbbcafc438f1e0557583c73.jpg)
When I exposed the electrical connection there is no ground wire. Is this safe? It's connected to a GFCI plug.
The connector has a ground symbol on is, but it's only two wires going to the element.
Here are the pics. Thanks!
Element
![IMG_3325.jpg IMG_3325.jpg](https://cdn.homebrewtalk.com/data/attachments/154/154320-734350269e6fcfebf8a2f5bff9b2f9f5.jpg)
Connector
![IMG_3326.jpg IMG_3326.jpg](https://cdn.homebrewtalk.com/data/attachments/154/154321-254a8bc7796b29b34641c4d28cd6e1e0.jpg)
Brewers Hardware
![IMG_3327.jpg IMG_3327.jpg](https://cdn.homebrewtalk.com/data/attachments/154/154322-c83455d72bbbcafc438f1e0557583c73.jpg)