I kegged my first batch on Sunday. I am seeking a little bit of guidance.
This is the procedure I followed:
1. Sanitized keg and everything involved. Brought it up to pressure while sanitizer was in to check for leaks.
2. Racked directly into keg from secondary
3. Brought keg up to 25 PSI. Laid it on its side, rolled the keg back and forth smoothly for 5 minutes while under 25 PSI. (Per local home brew store instructions).
4. Brought down pressure to 12 PSI. Bleed off pressure to equalize it.
5. I was going to put this in my garage fridge but discovered it was not working. So I stored it in my hall closet at room temperature, 71 degrees, still at 12 PSI.
6. Garage fridge fixed, moved it into there this morning still at 12 PSI. Fridge was at 46 deg this morning. I understand I have to adjust the PSI for temp and style of beer.
My concern, i have been reading about the kegging process. I keep seeing "purge" the air. at the beginning I did not purge the air in the way I have read about. (Bring up to pressure, bleed, repeat 3 times.) If I don't purge the air will it spoil the beer, or does it just slow carbing?
Any other advice based on my process?
This is the procedure I followed:
1. Sanitized keg and everything involved. Brought it up to pressure while sanitizer was in to check for leaks.
2. Racked directly into keg from secondary
3. Brought keg up to 25 PSI. Laid it on its side, rolled the keg back and forth smoothly for 5 minutes while under 25 PSI. (Per local home brew store instructions).
4. Brought down pressure to 12 PSI. Bleed off pressure to equalize it.
5. I was going to put this in my garage fridge but discovered it was not working. So I stored it in my hall closet at room temperature, 71 degrees, still at 12 PSI.
6. Garage fridge fixed, moved it into there this morning still at 12 PSI. Fridge was at 46 deg this morning. I understand I have to adjust the PSI for temp and style of beer.
My concern, i have been reading about the kegging process. I keep seeing "purge" the air. at the beginning I did not purge the air in the way I have read about. (Bring up to pressure, bleed, repeat 3 times.) If I don't purge the air will it spoil the beer, or does it just slow carbing?
Any other advice based on my process?