New V3 Kettles from Spike? Anyone Have one yet?

[BrunDog]

Do they do bottom drains?

 

[jddevinn]

although not sure why anyone in their right mind would want a sight glass on their mash tun.

Fly sparging, to check that the inlet water flow = the outlet water flow.

 

[aprichman]

Fly sparging, to check that the inlet water flow = the outlet water flow.

The kettles come with volumetric markings now so you can do all of that without a sight gauge.

 

[itsnotrequired]

The kettles come with volumetric markings now so you can do all of that without a sight gauge.

but then you need to keep the lid off (or open it each time to check).

 

[PlexVector]

Hey guys! Sorry about some of the confusion. Right now we have all the new features listed under each kettle and it was specified that they were sold separately. We just changed the listings to show what is sold separately (specifically the false bottom and pick up tubes). The false bottom will come with the pickup tube and push to connect fitting.

We do sell our accessories 'a la carte' for a few reasons. 1) Many people are upgrading kettles and have valves, thermometers, etc that they may want to use. 2) We have 'good' and 'better' options for both valve and thermometer. 3) We weld on standard 1/2"npt fittings to keep our kettles as modular as possible. If you find a cheaper valve, pickup tube, etc we aren't trying to pigeon hole you into using our proprietary fittings (like a proprietary valve for example ).

We are reeeally trying to get all pre-orders out the door by the week of Nov 30th. We are still waiting on a few pieces to come in but we aren't expecting any major delays. Fingers crossed!!

If people have any questions we'll be monitoring this thread so please ask away!

-Tim

I'm looking to upgrade to a 15 Gal BK and really like your offering, but it looks like I have to figure a way to use the thermometer port as a whirlpool port also. Anyway to get one with an exclusive whirlpool port without having to drill one after the fact?

 

[SpikeBrewing]

I'm looking to upgrade to a 15 Gal BK and really like your offering, but it looks like I have to figure a way to use the thermometer port as a whirlpool port also. Anyway to get one with an exclusive whirlpool port without having to drill one after the fact?

The thermometer port wouldn't work as a whirlpool port as it's only a half coupler. However a large chuck of our business is doing custom orders. We'd be happy to help you out with that! Shoot Ben or I a message at [email protected].

-Tim

 

[itsnotrequired]

Appears to be etched. Can't wait to put the bag to use I got from you

is the lid handle 'wider' than the kettle handles, such that you can hang the lid handle on the kettle handle?

 

[SpikeBrewing]

is the lid handle 'wider' than the kettle handles, such that you can hang the lid handle on the kettle handle?

The lid does hang from the kettle handles

 

[Bowtiebrewery]

The thermometer port wouldn't work as a whirlpool port as it's only a half coupler. However a large chuck of our business is doing custom orders. We'd be happy to help you out with that! Shoot Ben or I a message at [email protected].

-Tim

Yep... Just e-mail them with your wants and needs. They are very responsive and can do just about anything. I had them create a recirculation port down low on my Boil Kettle. Easy peasy, and of course was done beautifully:
See:

 

[ViciousFishes]

I recently ordered two v3 kettles, each with recirculation ports. Now it's just a matter of waiting. That's not so easy considering even instant gratification takes too long...

 

[itsnotrequired]

their website now indicates the kettles will be available in one day!

 

[Capn_James]

I hope so. Starting to get irritated with my pre-order.

 

[Sharkness]

My pre-order 10g v3 came in last week. It's just like they describe, but nicer. The welds are perfect, and have been impeccably cleaned up, the damn thing is HEAVY with a feeling of quality, the silicone pads are all thick and stay in place, the etching is gorgeous… I've never seen a rival in quality outside a custom commercial setup.

 

[itsnotrequired]

My pre-order 10g v3 came in last week. It's just like they describe, but nicer. The welds are perfect, and have been impeccably cleaned up, the damn thing is HEAVY with a feeling of quality, the silicone pads are all thick and stay in place, the etching is gorgeous… I've never seen a rival in quality outside a custom commercial setup.

pics or gtfo!

 

[Sharkness]

The house is in extreme makeover mode so lighting sucks, but you get the idea.


View attachment ImageUploadedByHome Brew1449794483.044240.jpgView attachment ImageUploadedByHome Brew1449794505.276628.jpgView attachment ImageUploadedByHome Brew1449794532.277090.jpg

 

[Capn_James]

Looks nice

 

[Capn_James]

Any pics of the inside weld?

 

[WildernessBrewing]

Those welds look great. My 15gal should arrive tomorrow according to shipping. I'll upload some detailed pics

 

[Capn_James]

What is the point of a pre-order that is supposed to ship before they are open to everyone? The lack of communication from this vendor has made this a purchase I regret.

 

[SpikeBrewing]

What is the point of a pre-order that is supposed to ship before they are open to everyone? The lack of communication from this vendor has made this a purchase I regret.

Sorry about the poor experience! Most of the pre-orders have gone out. A few kettles with sight glasses are being delayed. However all pre-orders have first priority and will be shipped first.

-Tim

 

[itsnotrequired]

What is the point of a pre-order that is supposed to ship before they are open to everyone? The lack of communication from this vendor has made this a purchase I regret.

have you reached out to them? who knows how many hundreds of orders they are dealing with, it is somewhat unrealistic to expect a vendor to reach out to each and every customer with constant updates. i too have a kettle on order and have inquired on the status several times. i believe 20 hours was the longest it ever took them to get back to me, most times it was within a few hours. of course, i'm not in a big rush to get my kettle so i have patience on my side...

 

[Bowtiebrewery]

They have always been very responsive with me. Just shoot them an e-mail. I know the wait can suck, but honestly, Spike Puts out a really nice product. You won't be disappointed at all.

 

[WildernessBrewing]

Just got delivered today. It's beautiful.

View attachment 1449888805337.jpg

View attachment 1449888812367.jpg

View attachment 1449888822026.jpg

View attachment 1449888830486.jpg

View attachment 1449888840957.jpg

 

[Sharkness]

I guess I look at it in the pro column-- I like the fact that they're a small company, that I can write an email and be in touch with somebody who's actually involved with developing, making and using the product, and that I'm supporting a small business. Part of that means that they're dealing with the same sort of issues we all deal with in life, and not everything happens exactly as planned.

 

[itsnotrequired]

just got notification that my kettle has shipped, should be here tomorrow!

 

[Drumminguy81]

Must resist urge to use credit card on 3 new 30 gallon kettles! Hurry up tax return season!

 

[itsnotrequired]

kettle showed up today. these things are amazing!

more details here: https://www.homebrewtalk.com/showthread.php?p=7280262

 

[Mer-man]

Is there an option for liter volume markings?

 

[NewJersey]

I want to get two 20 gallon pots and one false bottom. (Gonna keep one keggle as a hlt)
I normally do 10 gallon batches now, but sometimes do 5 gallon still.
How high up is the top vertical coupler on the 20 gallon??

 

[SpikeBrewing]

I want to get two 20 gallon pots and one false bottom. (Gonna keep one keggle as a hlt)
I normally do 10 gallon batches now, but sometimes do 5 gallon still.
How high up is the top vertical coupler on the 20 gallon??

6" up at the 6.5 gallon mark.