My first attempt at spruce beer.

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dynachrome

Well-Known Member
Joined
Oct 18, 2008
Messages
2,294
Reaction score
137
Location
Americas Hinterland
I had subscribed to a couple other threads.

https://www.homebrewtalk.com/threads/17th-century-french-beer.166923/#post-3774117
I froze a couple pounds of spruce tips from a (black spruce) tree we cut down in our back yard in the spring a couple years ago.

The grain bill was 22lbs of maris otter with a couple pounds of mixed cara-pils. I split the wort in three for two other batches. 6 oz of Weyerman's chocolate dark barley.

At first i tried about 4 oz of tips in the boil. I boiled for an hour after adding the initial spruce addition.

I didn't get much odor from that. I took the rest of about 1 lb container in a pyrex bowl and 1/2 oz of mosaic hops and microwaved it in water to make a tea. I got busy and forgot to take a picture. I added this at transfer into fermentor.

I put this in a glass top heavy stainless pot so I could watch the progress.

O.G. was 1.060
 

Attachments

  • PXL_20230725_110542554.jpg
    PXL_20230725_110542554.jpg
    3.2 MB · Views: 0
  • PXL_20230723_171810763.jpg
    PXL_20230723_171810763.jpg
    3.2 MB · Views: 0
Last edited:
I've made 3 batches of spruce ale over the years in the spring with fresh new tip growth from a Norway spruce.
First one was overpowering to me using 4 oz at 15 end of boil. Very limey taste.
Last one I made recently, I used only 2 tips at 15 and the taste is there but more in balance with the hops.
 
Okay, this smells very beer like. I'm going to use about 1.3 oz of bottling priming sugar for what will be probably just over 2 gallons.

I'm wearing my safety slippers just in case.
 

Attachments

  • PXL_20230805_175606651.jpg
    PXL_20230805_175606651.jpg
    3.5 MB · Views: 0
  • PXL_20230805_175929258.jpg
    PXL_20230805_175929258.jpg
    4.8 MB · Views: 0
  • PXL_20230805_175600102.jpg
    PXL_20230805_175600102.jpg
    2.6 MB · Views: 0
Last edited:
We added two tablespoons of cane sugar to 2 gallons. I forgot to take the final gravity reading. It says 1.010 right now with the sugar added.

From what I gather from this thread below, each tablespoon raises one gallon by 0.005?

Taking that farther, my beer was probably really dry, like less than 1.008?

https://www.homebrewtalk.com/threads/1-cup-of-sugar-sg-per-gal.467598/
 

Attachments

  • PXL_20230805_181558504.jpg
    PXL_20230805_181558504.jpg
    2.9 MB · Views: 0
  • PXL_20230805_181602977.jpg
    PXL_20230805_181602977.jpg
    2.5 MB · Views: 0
The one with the red top is the last bottle out of the bottling bucket. I keep that off to the side.
 

Attachments

  • 16912619878434210403664554877350.jpg
    16912619878434210403664554877350.jpg
    1.2 MB · Views: 0
Going to make it again?

This spring, I did a Saison with 12 oz of White Spruce tips at flameout. It's very pine forward, but I enjoy it a lot. I've also done a few spruce IPAs with pleasing success. I haven't tried an "old world" style amber with tips yet though.
 
Back
Top