March 809 Trouble shooting!

[DrunkenJamaal]

How do I prime my march pump. I tried testing it by running it through my Keggles I have 12 ft. total length of my high heat hose it will only go to the tip of the hose and no further any advice?

 

[CodeRage]

Have the hose end at the lowest point and let it run a bit. while the hose is siphoning/draining turn the pump on. You'll hear it spin up quickly and then the pitch will go lower and water will start screaming out of the hose. Turn the pump off and put the hose where ever. you are now primed.

 

[DrunkenJamaal]

Thanks man!