corychamplin
Member
- Joined
- Sep 26, 2013
- Messages
- 11
- Reaction score
- 3
Idylis 5 cubic foot chest freezer from lowes
johnson controls digital thermostat control from amazon i think
kegco stainless coupler amazon
keg coupler low profile elbow bend (modified with by cutting off thread then welding on 3/4 TC)
3/4" tc 45 degree elbows, clamps, gaskets from glacier
3/4" ss tube from local metal supply
1-1/2" TC ferrule with 3/4 tube diameter from ebay
1" TC ferrule modified (cut off tube enlarged hole to 1" ID then welded to modified faucet)
perlick SS with flow control modified, ground off rear threads, welded on modified 1" ferrule
I made this because the brewing industry puts a lot of effort into eliminating threaded connections and hose barbs except when it comes to beer dispensing. This is my attempt at eliminating hoses and minimizing threaded connections in beer dispensing.
johnson controls digital thermostat control from amazon i think
kegco stainless coupler amazon
keg coupler low profile elbow bend (modified with by cutting off thread then welding on 3/4 TC)
3/4" tc 45 degree elbows, clamps, gaskets from glacier
3/4" ss tube from local metal supply
1-1/2" TC ferrule with 3/4 tube diameter from ebay
1" TC ferrule modified (cut off tube enlarged hole to 1" ID then welded to modified faucet)
perlick SS with flow control modified, ground off rear threads, welded on modified 1" ferrule
I made this because the brewing industry puts a lot of effort into eliminating threaded connections and hose barbs except when it comes to beer dispensing. This is my attempt at eliminating hoses and minimizing threaded connections in beer dispensing.