rkhanso
Well-Known Member
- Joined
- Jan 24, 2017
- Messages
- 776
- Reaction score
- 175
I'm not sure whether to post this help request in the big ispindel thread, but think it may be better to separate them for future people who need help. That big thread is hard to search.
I bought my iSpindel - didn't make it. I'm a novice with the iSpindel. Trying to follow the directions at the iSpindel website.
I use CraftbeerPi and want to set up the iSpindel to work with it, but had trouble getting that working, so I thought I'd back up and see if I can get it to work with Ubidots.
With Ubidots, I can get one initial update on the Ubidots webpage, but then no updates after that. I've waited 30+ minutes and only see the initial update.
I'm not sure if the issue of no additional updates is a problem here, but I suspect it is. Though not the same problem why I can't get it to work with CraftbeerPi.
Now, I understand there's a glitch in the iSpindel setup when using CraftbeerPi, since CraftbeerPi uses port 5000. So, during the config of the iSpindel, set the type to http, the IP address to my CraftbeerPi server, the port to 5000. Then I change the type to CraftbeerPi and then save it. I reboot my CraftbeerPi server and still never get any data other than zeroes to show up in the CraftbeerPi fermenter display.
What is the best way to troubleshoot this? Should I get the updates to happen with Ubidots first? Or just jump to try to get it working with CraftbeerPi?
Can anyone offer direction? I'm not sure what to do.
WiFi Information
Configured to connect to access point MakCommHome and currently connected on IP 192.168.2.7
Device Data
Name Value
Chip ID 7812967
Flash Chip ID 1454108
SDK Version 2.2.1(cfd48f3)
Free HEAP 31304
IDE Flash Size 1048576 bytes
Real Flash Size 4194304 bytes
Access Point IP 192.168.4.1
Access Point MAC 2E:F4:32:77:37:67
SSID MakCommHome
Station IP 192.168.2.7
Station MAC 2C:F4:32:77:37:67
I bought my iSpindel - didn't make it. I'm a novice with the iSpindel. Trying to follow the directions at the iSpindel website.
I use CraftbeerPi and want to set up the iSpindel to work with it, but had trouble getting that working, so I thought I'd back up and see if I can get it to work with Ubidots.
With Ubidots, I can get one initial update on the Ubidots webpage, but then no updates after that. I've waited 30+ minutes and only see the initial update.
I'm not sure if the issue of no additional updates is a problem here, but I suspect it is. Though not the same problem why I can't get it to work with CraftbeerPi.
Now, I understand there's a glitch in the iSpindel setup when using CraftbeerPi, since CraftbeerPi uses port 5000. So, during the config of the iSpindel, set the type to http, the IP address to my CraftbeerPi server, the port to 5000. Then I change the type to CraftbeerPi and then save it. I reboot my CraftbeerPi server and still never get any data other than zeroes to show up in the CraftbeerPi fermenter display.
What is the best way to troubleshoot this? Should I get the updates to happen with Ubidots first? Or just jump to try to get it working with CraftbeerPi?
Can anyone offer direction? I'm not sure what to do.
WiFi Information
Configured to connect to access point MakCommHome and currently connected on IP 192.168.2.7
Device Data
Name Value
Chip ID 7812967
Flash Chip ID 1454108
SDK Version 2.2.1(cfd48f3)
Free HEAP 31304
IDE Flash Size 1048576 bytes
Real Flash Size 4194304 bytes
Access Point IP 192.168.4.1
Access Point MAC 2E:F4:32:77:37:67
SSID MakCommHome
Station IP 192.168.2.7
Station MAC 2C:F4:32:77:37:67