Joecal1952
Member
First, I thank you all for allowing me in this awesome forum!
I think I made the biggest and expensive mistake in being talked into using a conical vessel for making my Barolo style wine. The guy in the store gave me specific instructions and I now find out that he may have guided me wrong. It is a 6 gallon kit, and the vessel is 8 or more gallons.
I was told to add juice and bentonite and top off to the 6 gallon mark. Wait about a day or so and the fermentation would begin and you'll see the bubbles start in the airlock. All this happened as planned, and at that time I opened the valve to let the sediment begin to collect in the ball. After 5 days, fermentation slowed way down and I was told to remove the collection ball at this time, empty and sanitize it and replace it. I did this, and I shook the vessel slightl as he told me to and fermentation picked up a bit Here is where I think he messed me up. He told me with Barolo, I would need to let the wine sit for FOUR WEEKS, untouched, in the vessel. After four weeks, remove the collection ball and sanitize for future use. Then add in 3 packets that came with the juice, one at a time, and degas between adding each packet. I did this. He then told me wait an additional TWO weeks - add the oak essence and smoother, stir in and bottle.
OK - I taste tested the wine at the four week mark and it was horribly bitter, but clear. Not like vinegar, just bitter. I have one more week to wait to bottle. Is this wine ruined because there was too much space between the juice and the lid, or will this wine get better after bottling and aging? Thanks for any help. Maybe I should go buy a carboy and use this expensive vessel as a primary fermenter?
I think I made the biggest and expensive mistake in being talked into using a conical vessel for making my Barolo style wine. The guy in the store gave me specific instructions and I now find out that he may have guided me wrong. It is a 6 gallon kit, and the vessel is 8 or more gallons.
I was told to add juice and bentonite and top off to the 6 gallon mark. Wait about a day or so and the fermentation would begin and you'll see the bubbles start in the airlock. All this happened as planned, and at that time I opened the valve to let the sediment begin to collect in the ball. After 5 days, fermentation slowed way down and I was told to remove the collection ball at this time, empty and sanitize it and replace it. I did this, and I shook the vessel slightl as he told me to and fermentation picked up a bit Here is where I think he messed me up. He told me with Barolo, I would need to let the wine sit for FOUR WEEKS, untouched, in the vessel. After four weeks, remove the collection ball and sanitize for future use. Then add in 3 packets that came with the juice, one at a time, and degas between adding each packet. I did this. He then told me wait an additional TWO weeks - add the oak essence and smoother, stir in and bottle.
OK - I taste tested the wine at the four week mark and it was horribly bitter, but clear. Not like vinegar, just bitter. I have one more week to wait to bottle. Is this wine ruined because there was too much space between the juice and the lid, or will this wine get better after bottling and aging? Thanks for any help. Maybe I should go buy a carboy and use this expensive vessel as a primary fermenter?