- Joined
- Dec 28, 2013
- Messages
- 78
- Reaction score
- 6
I moved 2+ years ago and my electric brewery has remained in boxes. Unfortunately, I’m getting out of the hobby and selling it all.
$1,000 asking for everything together, or best offer
Not willing to ship at this time, but I’m happy to meet you somewhere in the greater Indianapolis area.
Here is a list of equipment. It not complete but the pictures show most all of it. I had ~20 brews on it and loved the simplicity and ease of clean up. I could get through an all-grain brew day from set up to clean up in 5 hours or less.
15 gallon brewing kettle (the picture does not show one additional port, which I used for the heating element)
Grain basket for kettle
Grain basket for kettle with solid sides
Electric panel, controlling temperature and pump
Various tri-clamp fittings, other fittings
Corny kegs
Two dip tubes have been cut an inch or so to allow for fermentation in the keg
Thermo well and stopper with modified lid for fermenting included
Air tight 5 gallon buckets for storing grain
Barley crusher mill
Lovejoy coupling
High torque, low speed hand drill
Copper heat exchanger with special cradle to allow use over the heating element.
Kettle with custom herms set up
Perlick faucets with locks and wrench
5lb CO2 tank with regulator
Gas line splitters
Various ball lock fittings for corny kegs
Draft line
RO filter system with fittings
TDS meter
Steam condenser set up (never used)
Refractometer
Hydrometer
Digital scale
Blickman Beer Gun
Blickman autosparge
Temp controllers - one for keezer, one for fermentation temp control
Plug-in heat wrap
Chugger pump with soldered tri-clamp fittings
Extra gaskets
Keg washer
Plate spinner with magnets
Other odds and ends
It has been 2.5+ years since I brewed with this equipment. It is being sold "as is" and I cannot guarantee it will work as intended, but I have no reason to believe it won't be just as great for you as it was for me!
$1,000 asking for everything together, or best offer
Not willing to ship at this time, but I’m happy to meet you somewhere in the greater Indianapolis area.
Here is a list of equipment. It not complete but the pictures show most all of it. I had ~20 brews on it and loved the simplicity and ease of clean up. I could get through an all-grain brew day from set up to clean up in 5 hours or less.
15 gallon brewing kettle (the picture does not show one additional port, which I used for the heating element)
Grain basket for kettle
Grain basket for kettle with solid sides
Electric panel, controlling temperature and pump
Various tri-clamp fittings, other fittings
Corny kegs
Two dip tubes have been cut an inch or so to allow for fermentation in the keg
Thermo well and stopper with modified lid for fermenting included
Air tight 5 gallon buckets for storing grain
Barley crusher mill
Lovejoy coupling
High torque, low speed hand drill
Copper heat exchanger with special cradle to allow use over the heating element.
Kettle with custom herms set up
Perlick faucets with locks and wrench
5lb CO2 tank with regulator
Gas line splitters
Various ball lock fittings for corny kegs
Draft line
RO filter system with fittings
TDS meter
Steam condenser set up (never used)
Refractometer
Hydrometer
Digital scale
Blickman Beer Gun
Blickman autosparge
Temp controllers - one for keezer, one for fermentation temp control
Plug-in heat wrap
Chugger pump with soldered tri-clamp fittings
Extra gaskets
Keg washer
Plate spinner with magnets
Other odds and ends
It has been 2.5+ years since I brewed with this equipment. It is being sold "as is" and I cannot guarantee it will work as intended, but I have no reason to believe it won't be just as great for you as it was for me!
Last edited:
