Also, where do you suggest I get the corny kegs?
Thanks!
ozzy1038 said:It allows you to see how much co2 is left.
Thanks, I got the threaded one. Not sure what the hell I'm doing when the tower comes haha
Ohio-Ed said:Correction... It allows you to see if ANY co2 is left. The gage won't move until all the liquid is gone, then you are literally on fumes.
Well that then defeats the purpose of a second gauge.
Likely wondering why you didn't order the MFL hose connectors to hook up the QDs...
Cheers!
Likely wondering why you didn't order the MFL hose connectors to hook up the QDs...
Cheers!
What the heck are MFL hose connectors?
I use an pressure sprayer with a 1/4 flare fitting HD, Lowes allows you to connect the line to sprayer fill with starsan or cleaner open tap set a bucket under, pump up pull trigger to flush line. The QD disassemble from the screw on the top. After a couple of times you can do it in your sleep......10 to 15 foot lines (3/16 ID ) @ 8-12 psi depending on style of course has worked for me... not a fan of over-carbed beer enjoy kegging.Any suggestions for a cleaning solution/ process or guidance on how I get to a successful first pour?
Thanks
Brett
ozzy1038 said:You'll need a 2-3 tap tower. Birdman brewing has a three tap for a great price. You'll need to get the perlicks separately. You wont need that sanke connection unless you are going to use that style of keg. do you know if 3 kegs will fit in that? If not, some modification of the interior may be needed. You will need disconnects for the corny kegs, you will also need a 2-3 port manifold. The regulator you have will work but you may want to upgrade to a dual gauge sometime. You'll also need to get some gas line for your CO2. which is typically 5/16.
Thanks- so what went wrong with my keg connection order? I ordered the standard grade ball lock kegs. Do they offer the kegs you are speaking ofif I want to return them? Either the kegs or the tower have to go back- what says you?
[...]The fridge space is 16 " wide so two 8" diameter corny's should just barely fit with the width. It is 15 " L so the third would definitely fit I could fit two kegs in the back of it.
Thanks for the graphic! What does a collar look like, where do i get one and how difficult is this operation you speak of?
Thanks again
Enter your email address to join: