• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Half barrel all grain brew set up (Greenville, SC)

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

HollisBT

Well-Known Member
Joined
Aug 31, 2011
Messages
699
Reaction score
69
Location
Greenville
I have for sale a complete half barrel brew rig that I need to get rid of. This set up consists of a custom welded brew stand, all stainless steel blichman kettles, and a host of extras as listed below. Please read the full listing if you are interested, I am not wanting to split this up at the moment and sell individual pieces. I would like to sell it all together, and as I will be moving soon, I would like to sell it quickly, so I am open to reasonable offers.

What is included:

Custom brew stand, three high output propane burners, two stainless steel head chugged pumps (one pump is seized, I think it can be fixed, I think that the bearings are stuck), tri-clover fittings on the pumps.
Three blichman stainless steel kettles. 1 15 gallon kettle (HLT), 1 15 gallon kettle with false bottom and auto sparse attachment (MLT), and one 20 gallon brew kettle. All are fitted with tri clover fittings for sanitary and easy quick connects.
Jade hydra immersion chiller, with whirlpool arm.
O2 kit for oxygenating your wort.
All fittings and hardware for the tri-clover fittings, including the silicone gaskets
High temp silicone tubing for hot side transfer, including tri-clover fittings. The tubing is perfectly fine to use, although if it were me, I would go ahead and replace it for piece of mind.
Chest freezer for fermentation, including temp controller
4 tap kegerator with all hardware. I would highly recommend changing the beer lines. I have some unused beer line that will be included.
7 pin lock corny kegs
Bottling gun for bottling from kegs
an abundance of cold side equipment and tools, including plastic fermenters
I also have a ton of bottles that I can include. Several cases of empty and clean bottles from bells, and 22 oz bombers. disclaimer though, these will be going to the recycling center if this is not sold before I move.

There is for sure a lot of other bits that I can’t remember that are included, I can get more pictures if desired. I haven’t used this equipment in a few years, so I honestly can’t remember all that there is. This served as a great brew set up for me when I was brewing, and it comes as a pretty much turn key operation for anyone who ends up with it. I used it to make 10 gallons at a time, typically split between two different fermenters so that you can play with different yeasts or post fermentation ingredients.

Item is located in Greenville, SC for pick up. I am moving soon so I would like to sell ASAP, with that being said I will start by asking $3,000 for everything, which I think is fair. But I am open to offers. Please PM me with any questions.
 

Attachments

  • B780FF41-9165-4BF7-A39B-1180E4B2BF68.jpeg
    B780FF41-9165-4BF7-A39B-1180E4B2BF68.jpeg
    1.7 MB · Views: 161
  • 67ACD880-3A8D-4D8B-965C-B27137BE9E46.jpeg
    67ACD880-3A8D-4D8B-965C-B27137BE9E46.jpeg
    2.2 MB · Views: 141
  • 9C363F82-2F7D-4BE8-A522-0BA684252B8C.jpeg
    9C363F82-2F7D-4BE8-A522-0BA684252B8C.jpeg
    2.2 MB · Views: 111
  • 86E618D1-7EEC-447C-B171-AA5C570D0319.jpeg
    86E618D1-7EEC-447C-B171-AA5C570D0319.jpeg
    1.4 MB · Views: 110
  • FEB3C1AE-84DF-4624-AA62-FB4E61467A6F.jpeg
    FEB3C1AE-84DF-4624-AA62-FB4E61467A6F.jpeg
    1.9 MB · Views: 106
Last edited:
Very interested in the Hydra if you decide to part with individual items. Possibly interested in other items as well.
Im in Clemson so not too far away.
Cheers
Scott
 
Thanks for your interest guys, if anyone becomes interested in buying just the large items, I will consider breaking the lot up.
 
Price drop to $2000 for everything, would really like to get this stuff out of my garage before I move lol.
 
Back
Top