Thanks for the ideas guys.
I will think about that cord Pickles.
The jacuzzi panel seams like a better idea now knowing it could be running multiple circuits. What I would really like though is a Square D CB, unfortunately I do not have the Homeline panel but the pro one. I see GFCIs for this in single pole configuration but not double pole.
One question on the dual voltage wires though. I have read that the jacuzzi panel or the 30A cord needs to be fed 4 wires to work. I currently live in an older rental. I was planning on wiring off the Dryer outlet which is only 240V.
Does this cord or panel really need the neutral wire or just need it to run 120V in the same panel? Would there be a danger from running only the 240V to a panel or control box?
Could I run an individual wire from a 120v outlet into the panel to achieve the needed power? The nearest source to the intended brew area is a GFCI outlet. I am afraid of running it through a second GFCI and getting inadvertent tripping.
My plan is to run only a BK at 5500 watts, which should be under 23 amps, then a pump and a PID, SSR combo, off the top of my head the PID requires a 12V power supply? I do not think a pump and power supply should take more than 7 amps so a 30 A CB should work if can figure out the 4 wire issue.
If I run a four wire does the two pole GFCI protect the neutral wire and 120V circuits as well?