g-love's e-herms brew rig build

[g-love]

P-J, if you have a chance, could you double check the diagram wiring for the timer against the pictures of the timer shown here? I feel like there is a mistake (maybe in how Auber says to wire it on their site). I'm thinking some of the connections are off based on the terminal labels on the timer itself. I'm not challenging you, just asking if something got mixed up.

Any help is much appreciated, as always. I'm aiming to finish the wiring today if possible.

 

[P-J]

The wiring layout printed on the controller in this image is correct.
Termial #7 is the output common, #6 is the N/C & #8 is the N/O.

Hope this helps.

P-J

Edit: BTW - Some of the diagrams from Auberins are not quite right. Your layout seems A-Ok.

 

[g-love]

Cool - Thanks P-J... I'll post some pics when I'm done.

 

[g-love]

Ok. The control panel wiring is done and it works like a charm! I ran a system test with water and I have some small leaks to fix, but overall it went really well.

The pumps work well right where they are. I was a little worried that the placement would cause an issue, but they didn't even blink as I was using them.

This rig is damn near functional. It's taken forever, but this has been such a fun and rewarding project.

Thanks again to P-J and the others who have answered questions along the way.