adamyoung
Well-Known Member
Hello, I have the items listed below available - I live in crown point, in, and work downtown Chicago so can meet up near either. Would take $425 for everything listed, or also consider partial trades in either direction if you have glass big mouth bubbler or ss brewtech brew buckets as I need more of both. Also need a 50- or 60- amp 240-volt gfci breaker, awg 4 wire (approx 180-200 feet), and 1” conduit - I’m kind of picky on condition of electric stuff, so not interested in random scraps...looking for newer/contiguous wiring/pipes:
4x Intertap fwd seal faucets, brand new / unused in box $16 ea or $60 for all 4
Blichman beergun with accesory kit- I have not used, but got it from someone who did not use, either, according to them $65
Nitro 20 cu ft aluminum tank with 3/17 hydro stamp - I bought this brand new last year, had it filled in Cicero, and never used it $100
Nitro regulator - the gauge for tank pressure has its face creased, but that does not seem to affect the function $30 on its own or $20 w/ the tank
co2 5 lb aluminum tank hydro stamp 7/14 $40
2L glass erlenmeyer flask, essentially new (admit I don’t recall using, but possible) $15
Jockey box cooler with some faucet/coupler/tubing parts as pictured (no chilling coils) $55
Water filter for standard garden hose attachment w/ new filter inside $15
Home Depot cooler with flexible copper tubing and vinyl tubing, and cut hole for airlock I made for ferm temp control for standard plastic brewing buckets (I used a pump hooked to a temp controller that cycled through a cold water reservoir in my keezer - swamp cooler reservoir would probably work ok, too $25
Misc hardware for rudimentary eherms setup - includes 2x Ranco controllers with custom wiring, 30-amp box with switches and what looks like a potentiometer, and outlet box with small arm of conduit and awg 8 wires inside - this set was from some kettles a buddy helped me with I’m planning to set up on a different system, so sadly I’m unfamiliar with how they work, etc $130 for the set
2x what I think are NEMA 10-30P plugs - I will detach them from the heating element cables pictured for an interested buyer. $15 for both
1 jar of 5.2 mash stabilizer. I don’t believe I wound up using this at all - possibly tried one very small dose. You can see in pic they don’t fill those jars full when new. $5
FYI I got an error that I posted too many pics, so will work on a follow up to this with additional pics.
4x Intertap fwd seal faucets, brand new / unused in box $16 ea or $60 for all 4
Blichman beergun with accesory kit- I have not used, but got it from someone who did not use, either, according to them $65
Nitro 20 cu ft aluminum tank with 3/17 hydro stamp - I bought this brand new last year, had it filled in Cicero, and never used it $100
Nitro regulator - the gauge for tank pressure has its face creased, but that does not seem to affect the function $30 on its own or $20 w/ the tank
co2 5 lb aluminum tank hydro stamp 7/14 $40
2L glass erlenmeyer flask, essentially new (admit I don’t recall using, but possible) $15
Jockey box cooler with some faucet/coupler/tubing parts as pictured (no chilling coils) $55
Water filter for standard garden hose attachment w/ new filter inside $15
Home Depot cooler with flexible copper tubing and vinyl tubing, and cut hole for airlock I made for ferm temp control for standard plastic brewing buckets (I used a pump hooked to a temp controller that cycled through a cold water reservoir in my keezer - swamp cooler reservoir would probably work ok, too $25
Misc hardware for rudimentary eherms setup - includes 2x Ranco controllers with custom wiring, 30-amp box with switches and what looks like a potentiometer, and outlet box with small arm of conduit and awg 8 wires inside - this set was from some kettles a buddy helped me with I’m planning to set up on a different system, so sadly I’m unfamiliar with how they work, etc $130 for the set
2x what I think are NEMA 10-30P plugs - I will detach them from the heating element cables pictured for an interested buyer. $15 for both
1 jar of 5.2 mash stabilizer. I don’t believe I wound up using this at all - possibly tried one very small dose. You can see in pic they don’t fill those jars full when new. $5
FYI I got an error that I posted too many pics, so will work on a follow up to this with additional pics.
Attachments
-
BF03570F-156F-44CF-A5A7-1CA2289C9AB5.jpeg -
EEDE898C-6D3C-4888-9C66-3052D8BA58C5.jpeg -
DA49C3E2-3350-4F12-BC41-B388627F5A4C.jpeg -
8116ACB0-3AFB-4E87-A0C0-2C558561DE58.jpeg -
E1451D16-1B73-4D2D-B22E-BAFF0BD4E7E2.jpeg -
0678AC5F-C079-4862-9160-1B11BB141679.jpeg -
44D4477E-B774-4216-B0DA-28EC9C711749.jpeg -
07D06DCD-3D9D-405E-9C48-26608BD47B7E.jpeg -
82DED951-F062-43CC-A1DC-BF7CE26772DC.jpeg -
5E0C4669-DBBF-4562-9E9D-2A1116DD089D.jpeg
Last edited:
