FastFerment Conical Fermenter PRESALE- $90 Shipped!!! Only 1000 units!

[Newsman]

And I got mine yesterday. It was sitting on my front porch when I got home.

 

[FuzzeWuzze]

Yes it threads in, with a piece of tape it think it will seal easily and little torque, with a little care I don't foresee a problem and if I do I'll cut it flush, plug it and put a thermowell through the lid, At the price you're not going to get stainless I'm happy enough, looking to putting it to use.

I'd rather they gave an option for an upgraded stainless thermowell.

I'd gladly pay the extra ~15-20 bucks or whatever it is than use brass.

Or atleast hear from them that its lead free brass, but i would be very surprised if thats the case.

 

[wbarber69]

Brewhardware has threaded thermowells. Although it would be nice to not to have to source your own replacement.

 

[FuzzeWuzze]

Brewhardware has threaded thermowells. Although it would be nice to not to have to source your own replacement.

True, now the question is are they a standard 1/2" NPT or were they dumb and put in 3/8ths like someone eluded too earlier...

 

[wbarber69]

They are probably 1/4" then. They fit in a 1/2" hole… brewhardware has those too

 

[mxstar21]

True, now the question is are they a standard 1/2" NPT or were they dumb and put in 3/8ths like someone eluded too earlier...

They are 1/2".

 

[wbarber69]

1/2" id or od

 

[mxstar21]

Probably inner I don't know. Whatever the standard 1/2" NPT threads are.

 

[mxstar21]

That's a Blichmann thermometer if that helps.

 

[cannman]

She arrived!

Overall, I'm impressed with the quality of the product. The plastic is thicker than I anticipated and the thermowell can be replaced with stainless. I fear that once this puppy is loaded with fluid, if anything ever gave way such as the mounts breaking off, stand tipping over, the Fastferment is going to crack and bust. Sure, if you drop a glass carboy, it will break too, but a glass carboy sits on the ground with a wide base support. The conical MUST be mounted or propped. The unit will fit in my spare full size fridg with the beer crisper removed, but otherwise, I'm going to have to wait and brew in this puppy in the winter when the ambient keeps the area in check...

 

[mxstar21]

I think this thing will work pretty good and will pay for itself with how easy it is to reuse yeast. My only question is why they put the hole for the thermometer where they did. It won't bother me because I have a stand, but if you mount the fermenter on the wall the thermometer is going to be in weird spot because it almost underneath where the wall mount is.

 

[Newsman]

I can't find a tape measure right now. Does anyone have the final measurements with the short stand? I'm guessing (based on what someone measured without the stand) about 40" tall and about 18" wide.

 

[Fast_Rack]

Hey Everyone,

Thanks for the all the comments and shares. Just home for a couple days before we head back to Michigan to finalize everything. I promise we are more relieved than you guys that everyone is receiving them! Its been a ton of work but by reading the comments it sounds like we're on track!

Please keep them coming.

1. I've added making a replacement stainless thermowell available asap. It will probably take a few months until we can make them here but they will come. If you can wait great or if not I'm sure you can find something online. I confirmed today it is 1/2" NPT.

2. We needed to have the thermowell located as close to the parting line as possible to ensure there was enough plastic for the threads. You'll notice the plastic is thicker near the parting line compared to the very front and back. We also needed it low enough to ensure it was submerged in the liquid enough but not too low that it would be hard to read. Our thought was that when mounted on the wall brackets it would have the volume markings and Thermometer facing outward to ensure the most function out of both the features.

3. The total height of the unit is 35.5" with the collection ball and air lock on it. The width is 14" without the mounting bracket bolts and 14.75" with the bolts.

Please keep the comments and questions coming. We will do our best to get back to you asap!

And keep us updated on how it works out, we want to hear from the experts! (YOU!)

Best - Cheers,

Casey & The FastRack Team

 

[mxstar21]

That makes total sense about location for the thermowell. I didn't think of that. Can't wait to try this thing out!

 

[DustyBrew]

Great info glad FastRack is staying with us....:thumbup:

 

[mxstar21]

Filled and waiting for action......
Go buy extra teflon tape. Had to keep re-taping after leaks. Need to make sure that you wrap threads better than I did the first few times.

Just make sure to wrap the Teflon tape in the direction it threads and you should only need one wrap. If it starts to bind up, the tape is the wrapped the wrong way. I had plenty of tape, but an extra roll is less than a buck at Lowes, so it definitely doesn't hurt to have a spare roll.

Awesome stand by the way!

 

[FuzzeWuzze]

Hey Everyone,

Thanks for the all the comments and shares. Just home for a couple days before we head back to Michigan to finalize everything. I promise we are more relieved than you guys that everyone is receiving them! Its been a ton of work but by reading the comments it sounds like we're on track!

Please keep them coming.

1. I've added making a replacement stainless thermowell available asap. It will probably take a few months until we can make them here but they will come. If you can wait great or if not I'm sure you can find something online. I confirmed today it is 1/2" NPT.

2. We needed to have the thermowell located as close to the parting line as possible to ensure there was enough plastic for the threads. You'll notice the plastic is thicker near the parting line compared to the very front and back. We also needed it low enough to ensure it was submerged in the liquid enough but not too low that it would be hard to read. Our thought was that when mounted on the wall brackets it would have the volume markings and Thermometer facing outward to ensure the most function out of both the features.

3. The total height of the unit is 35.5" with the collection ball and air lock on it. The width is 14" without the mounting bracket bolts and 14.75" with the bolts.

Please keep the comments and questions coming. We will do our best to get back to you asap!

And keep us updated on how it works out, we want to hear from the experts! (YOU!)

Best - Cheers,

Casey & The FastRack Team

Can you verify the height of the unit when its mounted in the small stand?

 

[mxstar21]

Can you verify the height of the unit when its mounted in the small stand?

The stand really only adds about inch, it doesn't make it much taller. I am at work so I can't measure. I would not want to be trying to put this thing into a tight fermentation chamber when full though. It would probably be a pain to try and move around and fit in a tight spot.

 

[FuzzeWuzze]

The stand really only adds about inch, it doesn't make it much taller. I am at work so I can't measure. I would not want to be trying to put this thing into a tight fermentation chamber when full though. It would probably be a pain to try and move around and fit in a tight spot.

I have a stand up freezer, so i have more than enough room it will still be a bit awkward but not too bad i dont think.

If you can get the measurement when you can that would be great thanks!

 

[cannman]

I have a stand up freezer, so i have more than enough room it will still be a bit awkward but not too bad i dont think.

If you can get the measurement when you can that would be great thanks!

Of course, you could always go with a blow off tube to save a few inches instead of using that airlock...

Old school

 

[mxstar21]

I have a stand up freezer, so i have more than enough room it will still be a bit awkward but not too bad i dont think.

If you can get the measurement when you can that would be great thanks!

Sorry it took me so long. Just went back to nights, 6 pm to 6 am and still adjusting. I measured 34" with it in the stand to the top of the lid. I didn't measure to the top of the airlock because it can vary depending on how far you push it down and you can add you can figure out anyway on your own from knowing the height of the lid.

I will add these things are nicely built and should pay for themselves pretty fast with how easy it will be to reuse yeast. I can't wait to use it! Let me know if you need more pictures or measurements. I am home tonight.


Sent from my iPad using Home Brew

 

[mxstar21]

 

[mxstar21]

Please note it's right at 34", just a poor camera angle.

 

[ChefRex]

View attachment 229144

Did you check the gallon scale or just black it out?

 

[mxstar21]

Blacked it out with a Sharpie.


Sent from my iPad using Home Brew

 

[cixelsyd]

I don't see a place to order the stand or extra balls on the site? Am I blind? The instructions on the order page say to try adding another one and then select a stand, but I don't see that option anywhere. Nor do I see accessories on any of the online vendors listed.

 

[cannman]

I don't see a place to order the stand or extra balls on the site? Am I blind? The instructions on the order page say to try adding another one and then select a stand, but I don't see that option anywhere. Nor do I see accessories on any of the online vendors listed.

Same here. I'm glad I didn't find it either since I have enough left over raw materials I can rig something up for free...

 

[Newsman]

It's a series of checkboxes as you add the fermenter to your shopping cart.

 

[M0KCE]

 

[zazbnf]

Just got this e-mail, haven't received a tracking number yet either, so hopefully it will get here.

Hello Everyone,

All orders have been sent to ship. If you haven't received a UPS email with your tracking # it should arrive shortly. UPS is dealing with big order so it's taking them some time.

If you can't find your brackets, they are under the cardboard insert in the bottom of the box, we had to do this to avoid scratching the FastFerment.

Thanks for getting involved!

Cheers,
The FastRack Team

Well so far the only thing I have received from them is this e-mail. No tracking and no package.