So, I'm a bit stuck. I've gotten my brew panel all together and have been hooking everything up. The pumps work, as do the probes. I went to turn on the element on with the pid in manual mode set to 100 and nothing happens.
If I have the element unplugged my indicator light is yellow.
I've done a voltage test on the outlet on the brew panel and one pole is reading 100v and the other 118v.
I'm guessing this might be my problem, since the outlet going into the box is fine (110 on each).
Has anyone else had this problem?
If I have the element unplugged my indicator light is yellow.
I've done a voltage test on the outlet on the brew panel and one pole is reading 100v and the other 118v.
I'm guessing this might be my problem, since the outlet going into the box is fine (110 on each).
Has anyone else had this problem?