Picked up the DIY 30amp BIAB kit from Electric Brewing Supply over Christmas. I used the 2018 draft wiring diagram to get it wired up. I've cleaned the cables up a bit since the picture below and crimped terminals on and zip-tied things together. Still need to test it out.
Will most likely just pull my drier out from the wall so I can plug it in and make sure everything works. I have a spa panel that I'll be installing in my basement.
The controller will be paired to a 20 gallon Spike kettle with 5500W element.
Will most likely just pull my drier out from the wall so I can plug it in and make sure everything works. I have a spa panel that I'll be installing in my basement.
The controller will be paired to a 20 gallon Spike kettle with 5500W element.