W Waynep005 Well-Known Member Joined Oct 24, 2011 Messages 528 Reaction score 39 Location Rancho Cordova Oct 26, 2011 #1 I have been doing partial boils to brew my beer, I now have a large enough brew pot to do a full boil. Will I need to reduce the amount of hops I use to achieve the same results?
I have been doing partial boils to brew my beer, I now have a large enough brew pot to do a full boil. Will I need to reduce the amount of hops I use to achieve the same results?
MalFet /bɪər nɜrd/ HBT Supporter Joined May 31, 2010 Messages 8,627 Reaction score 1,478 Location NYC / Kathmandu Oct 26, 2011 #2 Yup. If I recall correctly, I needed to nudge my hops down by about ten percent when I went from a 4gallon boil to a 7gallon.
Yup. If I recall correctly, I needed to nudge my hops down by about ten percent when I went from a 4gallon boil to a 7gallon.
ajf Senior Member HBT Supporter Joined Oct 29, 2005 Messages 4,648 Reaction score 121 Location Long Island Oct 26, 2011 #3 I think there is a lot of misinformation on this subject. http://www.thebrewingnetwork.com/shows/719 may shed some light in this apparent misinformation. -a.
I think there is a lot of misinformation on this subject. http://www.thebrewingnetwork.com/shows/719 may shed some light in this apparent misinformation. -a.