Corney Problem

[EZFrag]

Guys, I have a connector stuck on my post of one of my corney kegs. Any idea on how to remove it without damaging my keg?

Thanks

 

[Ender]

Dont that. I just pulled like heck and hoped for the best. Havent damaged one yet. Knock, knock

 

[samc]

Pry and twist, first it might help to
take off top plastic screw cap and spray some lube or soapy water

 

[rycov]

mine get stuck a little. sometimes i have make sure to really push the middle down while pulling the outside up

 

[a_shorething]

Did you release the pressure completely?

If so and it's still stuck, maybe spray it with some tap and line cleaner. I keep some in an old windex spray bottle for doing things in between dips or for doing the top of the keg and stuff. It's probably just sticky from beer foam.

 

[erikpete18]

Did you happen to put the liquid QD on the gas side, or vice versa? Just asking because I made that mistake a while back and quickly realized that they aren't the same size . I was able to remove it by gently rocking the QD back and forth, but I've read of a few people on here that had to eventually cut the QD to remove it and save their keg. Just a warning for the future!

 

[OntarioBeerKegs]

Use a wrench!


https://www.homebrewtalk.com/f35/issue-removing-quick-disconnect-231323/