Killdozer666
Member
Hi, selling off my entire rig! Here's what she has. Make me an offer on anything!
Pictures at https://drive.google.com/open?id=1zyHO_YJgrIwgKgqzx53EYqcOKmGEEkCM
1/2 BBL (15 gallon) brewery - $950
Features:
- Custom build, welded frame
- Inline March pump with temp gauge
- Hot Liquor Tank keggle with thermometer and sight glass
- Gravity fed liquor and wort transfer
- Tip / dump insulated mash tun
- Copper arm for wort re-circulation and carboy filling
- Cam lock tubing connections
- Copper immersion chiller
- False bottoms
- Inline 10" water filter w/ hoses, fittings, extra tank, hose wye with tubes and valves at end for HLT and immersion chiller
BREWING / FERMENTATION
Temp controller (analog) - Johnson controls - $35
wort thermometer - $2
propane tank gauge - $8
Custom built hot and cold temp controller - $40
brewer's refractometer - $25
metal carboy handle - $3
large racking cane / siphon - $8
brewer's edge fermentation space heater - $15
BOTTLING
bottle filler with spring stopper - $2
home made draught bottle filler - $0.50
02 absorbing caps, bag of 100 - $3
bottle capper - $10
bottle rinser - (screws to faucet) - $8
quick carbonation cap - $4
DRAUGHT / KEGGING
american sanke taps - 2 available, $15 each
ball lock gas connectors, barb end - $2
faucet wrench - $3
ball lock connector washers, nylon flared - 2 available, $0.5 each
brass shank assemblies, 4", stainless collars - 3 available, $20 each
barbs for sanke taps - 7 available, $1 each
screw drive tubing clamps - 9 available, $0.25 each
sanke to ball 1/4" screw ball lock connectors, flare nipple - 2 available, $3 each
1/4" flare to barb adapter - $3
keg lube - $2
wing nut sanke/shank connectors - tail pieces - 5 available, $4 each
keg pressure gauge assembly - $12
faucet caps - 2 available, $0.25 each
gas shutoff valve w/ barb - $4
tap handles w/ label holders - 4 available, $5 each
baseball card holders (use as tap handle label holders), box - $0.50
ball lock keg connectors, spare - 6 available, $6 each
ball lock keg lid gaskets - 3 available, $1 each
wooden tap handle face - $0.50
Pictures at https://drive.google.com/open?id=1zyHO_YJgrIwgKgqzx53EYqcOKmGEEkCM
1/2 BBL (15 gallon) brewery - $950
Features:
- Custom build, welded frame
- Inline March pump with temp gauge
- Hot Liquor Tank keggle with thermometer and sight glass
- Gravity fed liquor and wort transfer
- Tip / dump insulated mash tun
- Copper arm for wort re-circulation and carboy filling
- Cam lock tubing connections
- Copper immersion chiller
- False bottoms
- Inline 10" water filter w/ hoses, fittings, extra tank, hose wye with tubes and valves at end for HLT and immersion chiller
BREWING / FERMENTATION
Temp controller (analog) - Johnson controls - $35
wort thermometer - $2
propane tank gauge - $8
Custom built hot and cold temp controller - $40
brewer's refractometer - $25
metal carboy handle - $3
large racking cane / siphon - $8
brewer's edge fermentation space heater - $15
BOTTLING
bottle filler with spring stopper - $2
home made draught bottle filler - $0.50
02 absorbing caps, bag of 100 - $3
bottle capper - $10
bottle rinser - (screws to faucet) - $8
quick carbonation cap - $4
DRAUGHT / KEGGING
american sanke taps - 2 available, $15 each
ball lock gas connectors, barb end - $2
faucet wrench - $3
ball lock connector washers, nylon flared - 2 available, $0.5 each
brass shank assemblies, 4", stainless collars - 3 available, $20 each
barbs for sanke taps - 7 available, $1 each
screw drive tubing clamps - 9 available, $0.25 each
sanke to ball 1/4" screw ball lock connectors, flare nipple - 2 available, $3 each
1/4" flare to barb adapter - $3
keg lube - $2
wing nut sanke/shank connectors - tail pieces - 5 available, $4 each
keg pressure gauge assembly - $12
faucet caps - 2 available, $0.25 each
gas shutoff valve w/ barb - $4
tap handles w/ label holders - 4 available, $5 each
baseball card holders (use as tap handle label holders), box - $0.50
ball lock keg connectors, spare - 6 available, $6 each
ball lock keg lid gaskets - 3 available, $1 each
wooden tap handle face - $0.50