S Specs Member Joined Sep 17, 2009 Messages 17 Reaction score 1 Location Vancouver, BC Oct 23, 2009 #1 I am wondering what are good methods to clean off the dried up gunk on the inside of a blow off tube after use?
I am wondering what are good methods to clean off the dried up gunk on the inside of a blow off tube after use?
S sparkyaber Well-Known Member Joined Oct 28, 2008 Messages 404 Reaction score 2 Location Andover, MN Oct 23, 2009 #2 big bucket of oxyclean. Soak it. OR, get a small brush and wrap a wire around the end, fish is through the tube and pull through.
big bucket of oxyclean. Soak it. OR, get a small brush and wrap a wire around the end, fish is through the tube and pull through.
B Bonneville Well-Known Member Joined Aug 19, 2007 Messages 97 Reaction score 0 Location SLC, UT Oct 23, 2009 #3 PBW or Oxiclean... 24 hour soak.
marubozo I can has homebrew? HBT Supporter Joined May 28, 2009 Messages 30,950 Reaction score 5,490 Location SW Michigan Oct 23, 2009 #4 +1 for Oxiclean. It's easy, cheap, and works really well.
The Pol Well-Known Member Joined Feb 12, 2007 Messages 11,390 Reaction score 117 Oct 23, 2009 #5 Hot OxiClean soak... 30 minutes, bam.
C cryptonic84 Well-Known Member Joined Oct 13, 2009 Messages 73 Reaction score 0 Location Groton, CT Oct 23, 2009 #6 +1 hot oxyclean. make sure you rinse and sanitize though after you have soaked
Scut_Monkey Well-Known Member Joined Jan 28, 2009 Messages 2,624 Reaction score 18 Location Pittsburgh Oct 23, 2009 #7 I like to take my hose attachement at the utility sink and blast them with the "jet" setting. Then soak them in oxiclean for about an hour, not days as it leaves a film on the tubing. Works great.
I like to take my hose attachement at the utility sink and blast them with the "jet" setting. Then soak them in oxiclean for about an hour, not days as it leaves a film on the tubing. Works great.