Chronical (7 gal) gas quick disconnect accessory - SS Brewtech

[FredZ]

I've seen videos where people are able to connect a gas quick disconnect to the top of their chronical to do closed transfers. I contacted SS brewtech and they don't sell this accessory. Anyone know where to get the parts I need?

See the video for an example of what I'm talking about:

https://youtu.be/GZKAerZPjVs

Thanks in advance!

 

[bcrawfo2]

Bobby has one
https://www.brewhardware.com/product_p/tc15bll.htm
Above was beer post


This is gas
https://www.brewhardware.com/product_p/tc15blg.htm

You can also do it with parts depending on what else you might have up there...or if you use pin lock. Let me know and i can show you the parts

 

[pennengr]

Just make sure you use a relief valve as well. NorCal carries the following:

http://www.norcalbrewingsolutions.com/store/Ball-Lock-Gas-In-Pressure-Relief-Valve-1.5-Inch-Tri-Clover.html

 

[johnwpowell]

So I've been down this path. First you need the triclover pressure relief fitting from ss brewtech. I used to have 1 gas bottle and wanted to be able to swap over my ball lock from my keg to the chronical. On brewhardware.com there are 2 things which will work. One is to use the liquid ball lock coupler. Its a bit of a tight fit but will work. Other option is to get 2 gas keg posts and brew hardware has a coupler to join them together.

In the end for convenience I picked up a small co2 bottle dedicated to closed transfer.

PM me if you need any details.