Cacao Nib Tincture: Anybody Done This?

[AlexKay]

I've gotten OK results soaking nibs in vodka for ~2 days and then dumping the whole thing into primary 12 days in.

This time I'm doing some research first, and it seems like absolutely everyone has their own completely different way. One method that looks especially appealing is from this link. TL; DR (and some additional details added in):

• 8 oz cacao nibs, toasted at 250 F for 20 minutes
• 16 oz spirits (I'm going to use bourbon, because bourbon)
• Place in sealed jar, shake daily, sit for 4 days
• Strain out nibs and discard (I'm going to eat them, straight or over ice cream or something. Because bourbon.)
• Put tincture in freezer overnight, scrape fat layer off top
• Add to primary after fermentation is mostly done

Anyone tried something similar enough to this that can share their experience? Or do you have an alternate method that just works perfectly?

 

[Cheshire Cat]

When I made a chocolate stout I just added them to the secondary fermenter in a muslin bag and left for 14 days. Turned out well.

 

[day_trippr]

I keep a chocolate imperial stout on tap always. I marinade 8 ounces of roasted nibs plus a couple of scraped, chopped and smashed vanilla beans in enough dark rum to cover, and give the T'ware a good shake a few times a day, for about a week. Then I dump the whole thing in the beer and let that sit for a few days before kegging, with some nylon mesh rubber-banded to the tip of my racking cane to keep the nibs out of the keg (they wreak havoc on a nitro stout faucet)...

Cheers!

 

[AlexKay]

(they wreak havoc on a nitro stout faucet)...

I can imagine they might.

 

[suzeQ]

Put tincture in freezer overnight, scrape fat layer off top

Love this! I pretty much followed your protocol with this exception. I added nibs to a cherry wine and the oil residue took a long while to dissipate.

 

[Pacific Electric]

I keep a chocolate imperial stout on tap always. I marinade 8 ounces of roasted nibs plus a couple of scraped, chopped and smashed vanilla beans in enough dark rum to cover, and give the T'ware a good shake a few times a day, for about a week. Then I dump the whole thing in the beer and let that sit for a few days before kegging, with some nylon mesh rubber-banded to the tip of my racking cane to keep the nibs out of the keg (they wreak havoc on a nitro stout faucet)...

Cheers!

I do the same but strain out the solids before adding to my keg.

 

[ringneck]

I just did my first chocolate milk stout last week. I toasted the nibs and soaked them in vodka for 3 days. poured the whole thing into Secondary for a week, then transferred into a keg.
It's the first time I used a secondary because I wasn't sure if the nibs would just fall down into the yeast cake and get lost without imparting flavor.

 

[ace0005]

I’ve never used them before. So I froze mine in an effort to sanitize them, and I’m planning on adding them directly to the secondary. Anyone ever do this? Is there a reason why people soak them in vodka other than sanitation purposes?

 

[mac_1103]

Is there a reason why people soak them in vodka other than sanitation purposes?

The alcohol extracts the flavor more efficiently.

 

[day_trippr]

The alcohol extracts the flavor more efficiently.

Exactly. It's all about extract efficiency and simply dumping nibs in plain beer is largely a waste of good nibs...

Cheers!

 

[Hoochin'Fool]

I keep a chocolate imperial stout on tap always. I marinade 8 ounces of roasted nibs plus a couple of scraped, chopped and smashed vanilla beans in enough dark rum to cover, and give the T'ware a good shake a few times a day, for about a week. Then I dump the whole thing in the beer and let that sit for a few days before kegging, with some nylon mesh rubber-banded to the tip of my racking cane to keep the nibs out of the keg (they wreak havoc on a nitro stout faucet)...

I've had okay success with a cacao powder syrup in a couple of porters. Taste was nicely chocolatey for a couple of weeks, but it fades to almost undetectable from say week 6 thru week 12. How long does your chocolate imperial stay "chocolatey"? (I bottle everything)
Have tried adding the syrup at bottling time and at end-of-boil, no appreciable difference on flavor fade.

 

[AlexKay]

I tried pouring some bourbon into a Baltic Porter I have already, and got a nice (admittedly strong) taste at around 5% by weight. So roughly I’m looking at 30 ounces of bourbon for a 5-gallon batch. This seems like a lot; never mind the nibs. Am I way off base, and going to regret things later?

 

[tracer bullet]

You might find this interesting if you haven't seen it already: Brewing with Chocolate and Cocoa — Chocolate Alchemy

I soak nibs in vodka and after a few days actually just use a pipette to put a few drops into my glass before I pour my beer. I can play with the amount, play with what it's soaked in, and have some glasses with none added at all. Maybe something to consider.

 

[day_trippr]

How long does your chocolate imperial stay "chocolatey"?

Well...a long time.

I managed to screw up my back on Memorial Day 2021 which eventually resulted in a three unit/2 level spinal fusion (L4-L5-S1) that November. I was only given clearance to do anything remotely like "brewing" just a few months ago, and as I rebuild my pipeline with neipas I've been milking the heck out of the last keg of the last batch of my 11-12% chocolate stout which was kegged June 27 2021.

I have about 1/5th of the keg left and it still has a ton of chocolate character. The roasty character has attenuated somewhat, but the chocolate and vanilla are still leading the way. So, almost two years?

I have a batch of my Fantastic Haze clone just days from kegging and I've gathered everything together for another batch of that stout. Should get to brewing it by next weekend...

Cheers!

 

[Hoochin'Fool]

I managed to screw up my back on Memorial Day 2021 which eventually resulted in a three unit/2 level spinal fusion (L4-L5-S1) that November. I was only given clearance to do anything remotely like "brewing" just a few months ago, and as I rebuild my pipeline with neipas I've been milking the heck out of the last keg of the last batch of my 11-12% chocolate stout which was kegged June 27 2021.

Damn, sounds like a pretty horrific injury!

I have about 1/5th of the keg left and it still has a ton of chocolate character. The roasty character has attenuated somewhat, but the chocolate and vanilla are still leading the way. So, almost two years?

That's awesome, I'm gonna give it another try, thanks!

 

[day_trippr]

It wasn't a picnic. The whole pandemic thing didn't help, either.

fwiw, I've oft mentioned that I've kept this stout continuously on tap for well over a decade now as a short pour is my nightcap.
It's going to be close but I think I can keep milking what's left until the next batch is ready

This is a half-batch for me at five gallons but I've found it's better to list 5 gallon recipes than 10...

16 lb 2 row pale malt
1 lb flaked barley
1 lb chocolate malt
1/4 lb black barley malt
1/4 lb black patent malt (could combine both black malts into either one really)
1/4 lb roasted barley
1/2 lb crystal/caramel malt 40-60L
1/2 lb caramalt
1/4 lb Gambrinus Honey Malt

2 oz Chinook pellets, 60 minutes
2 oz Cascade pellets, 15-20 minutes
2 lb honey, end of boil (TURN OFF THE BURNER BEFORE STIRRING IN!)
1/2 lb low fat cocoa powder, end of boil
Fermentis S04, 2 packs
1/2 lb cacao nibs and a pair of scraped chopped and smushed vanilla beans, soaked in dark rum for a week, then add the whole thing at secondary
1 oz pure chocolate extract, add at kegging

I have been mashing this at 148°F to get the FG down in the mid-upper 20s.
Serve on nitro if possible! If so, only carbonate to ~1.2 volumes lest the pours turn into a chocolate foam fiasco...

Cheers!

 

[Hoochin'Fool]

Thanks for the recipe, day_trippr!

 

[day_trippr]

By all means please be my guest! I've posted it numerous times over the years but can never find them again

Cheers!

 

[camonick]

I have found that a high quality chocolate extract is much easier and provides a nice chocolate flavor. I tried toasted and soaked nibs in vodka once and hated the way it tasted (I hate vodka to begin with, and I could taste it in the beer). I was also told by the head brewer at Boulder Beer Co., when they were still in business as an independent brewery, that that’s what they used in their Skake Chocolate Porter.

 

[Hoochin'Fool]

I have found that a high quality chocolate extract is much easier and provides a nice chocolate flavor. I tried toasted and soaked nibs in vodka once and hated the way it tasted (I hate vodka to begin with, and I could taste it in the beer). I was also told by the head brewer at Boulder Beer Co., when they were still in business as an independent brewery, that that’s what they used in their Skake Chocolate Porter.

Do you have a brand name for this high-quality-chocolate extract? And a ounces-per-gallon ratio that you recommend?

 

[camonick]

I use this in my chocolate porter. A little goes a long way.
https://www.beanilla.com/chocolate-extract
I only use 15ml at kegging time. Adjust for your taste.

Edit: 5 gallon batch.

 

[rusteye]

Several years ago I went through a learning/experimenting process with cacao nibs. This link goes directly to the experimenting part, but the thread describes my education.

Re: Cacao Nibs in the Secondary

 

[Jag75]

Most extracts are made with Vodka. My mom makes vanilla extract often. It takes weeks to months . Try making some a couple months before your going to need it. You shouldn't be getting any vodka taste . You can't soak for a week or two and expect to get that full flavor extracted is what I've found .

 

[bwible]

Do you have a brand name for this high-quality-chocolate extract? And a ounces-per-gallon ratio that you recommend?

Here’s another one:

https://www.apexflavors.com/Beverag...avor-flavoring-natural-beer-wine-spirits~2891
Or

https://www.apexflavors.com/Beverag...tural-beverage-alcoholic-beer-cider-wine~6020
Or they have several others, including chocolate coconut, chocolate hazelnut, chocolate cake, chocolate raspberry or chocolate cherry bourbon

 

[bwible]

It wasn't a picnic. The whole pandemic thing didn't help, either.

fwiw, I've oft mentioned that I've kept this stout continuously on tap for well over a decade now as a short pour is my nightcap.
It's going to be close but I think I can keep milking what's left until the next batch is ready

This is a half-batch for me at five gallons but I've found it's better to list 5 gallon recipes than 10...

16 lb 2 row pale malt
1 lb flaked barley
1 lb chocolate malt
1/4 lb black barley malt
1/4 lb black patent malt (could combine both black malts into either one really)
1/4 lb roasted barley
1/2 lb crystal/caramel malt 40-60L
1/2 lb caramalt
1/4 lb Gambrinus Honey Malt

2 oz Chinook pellets, 60 minutes
2 oz Cascade pellets, 15-20 minutes
2 lb honey, end of boil (TURN OFF THE BURNER BEFORE STIRRING IN!)
1/2 lb low fat cocoa powder, end of boil
Fermentis S04, 2 packs
1/2 lb cacao nibs and a pair of scraped chopped and smushed vanilla beans, soaked in dark rum for a week, then add the whole thing at secondary
1 oz pure chocolate extract, add at kegging

I have been mashing this at 148°F to get the FG down in the mid-upper 20s.
Serve on nitro if possible! If so, only carbonate to ~1.2 volumes lest the pours turn into a chocolate foam fiasco...

Cheers!

5 gallon batch with 20 lbs of grain plus 2 lbs of honey added post boil. Wow. What is that coming in at - 1.125 - 1.130? Thats a real monster.

 

[bwible]

I’ve also experimented with chocolate syrups in the secondary along with cocoa powder late in the boil. I’m a big fan of Hershey’s special dark candy and I was able to find they sell special dark chocolate syrup too. They make a sugar free version which I think would be better to use in the secondary as it won’t ferment out. I haven’t seen the sugar free version on shelves for awhile though. It seems to be hard to find now.

 

[agentbud]

I have found that a high quality chocolate extract is much easier and provides a nice chocolate flavor. I tried toasted and soaked nibs in vodka once and hated the way it tasted (I hate vodka to begin with, and I could taste it in the beer). I was also told by the head brewer at Boulder Beer Co., when they were still in business as an independent brewery, that that’s what they used in their Skake Chocolate Porter.

Agree. I have been on a binge the last few years to try and get the chocolate taste of a Samuel Smiths Chocolate Stout. I've tried every combination of nibs, powders, syrups, etc. The closest I have come, and IMHO the best chocolatey taste so far, was in a recent chocolate coconut porter, I added 40ml (about 1.3 oz) of Apex Silver Cloud Chocolate extract. Added it directly into empty keg and transferred finished beer on top.

 

[Hoochin'Fool]

I tried pouring some bourbon into a Baltic Porter I have already, and got a nice (admittedly strong) taste at around 5% by weight. So roughly I’m looking at 30 ounces of bourbon for a 5-gallon batch. This seems like a lot; never mind the nibs. Am I way off base, and going to regret things later?

6 ounces bourbon per gallon of beer sounds kind of crazy to me, but if you tasted it and liked it like that (and double-checked your math!), I say go for it!

 

[AlexKay]

6 ounces bourbon per gallon of beer sounds kind of crazy to me, but if you tasted it and liked it like that (and double-checked your math!), I say go for it!

Measure twice, pour once, I always say.

 

[bwible]

Not to mention what 30 ounces of bourbon is going to do to the alcohol percentage of a 5 gallon batch.