bpaulik
Well-Known Member
I'm hoping I will be able to get some advice. I purchased 3 BG14 burners https://www.amazon.com/gp/product/B01BV3DYIE/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 and the low pressure orifice/valve https://www.brewershardware.com/Valve-and-LPG-Orifice-for-BURN10.html#product-details-tab-description for my Brutus system I'm attempting to build. I tested the burners with a 0-20 regulator and the original orifice and everything worked fine. I replaced the orifice with the new orifice/valve and the regulator with an 11" WC regulator and now all I get is an orange flame. It seems that no mater what I do with the air shutter and the valve I can't get anything other than an orange flame. Even with the valve opened only half way and the air shutter completely closed I get a 2 foot tall orange flame. If I open the shutter even just a little bit the flame gets bigger.
Anyone have any ideas as to what I might be doing wrong?
Anyone have any ideas as to what I might be doing wrong?
Last edited by a moderator: