brentt03
Well-Known Member
Here is a pic of the lower half of my Brewhemoth, as you may notice, I went with a TC version. But the transfer process works the same, just with different (and in your case, less) fittings.
I opted to use a TC beer thread adapter instead of ordering a TC 1/4" hose barb (which were hard to find when I ordered my fittings) with a 1/4" MFL tailpiece.
I complied this list of fittings to order from Midwest for you, this should be everything you need assuming you have a 1/4" MFL on your gas line from your regulator.
If not, you should. MFLs are the way to set everything up in your kegerator so it is easy to go from commercial to corny and back.
1/4" MFL to 1/2" NPT X 1
http://www.midwestsupplies.com/1-4-mfl-to-1-2-npt.html
Barbed Swivel Nut, 1/4" Flare, 1/4" Barb X 2
http://www.midwestsupplies.com/barbed-swivel-nut-1-4-flare-5-16-barb-2.html
Ball Lock Liquid Disconnect, Threaded X 1 (If you don't have a spare)
http://www.midwestsupplies.com/ball-lock-liquid-fitting-threaded.html
Ball Lock Gas Disconnect, Threaded X 1 (if you don't have a spare, for the pressurizer)
http://www.midwestsupplies.com/ball-lock-gas-fitting-threaded.html
1/4" ID Beer/Gas Line X 5 (feet)
http://www.midwestsupplies.com/beer-and-gas-line.html
Stainless Steel Tubing Clamp X 2
http://www.midwestsupplies.com/stainless-steel-tubing-clamp.html
Awesome! Thanks for all the links!
For some reason the pic isn't showing up for me??