drksky
Well-Known Member
- Joined
- Feb 8, 2013
- Messages
- 362
- Reaction score
- 52
I was lautering with a G2 kettle today (gravity, no pump) and found that once the kettle got down to about 3 gallons, the flow slowed to a trickle even with the valve fully open. Without tipping the pot, it flow slowed to practically nothing.
Am I missing something that is causing this valve to flow so slowly? Would it work better using a pump? Although it seems with non-self-priming pumps that the slow flow would just cause the pump to cavitate and not pump anything.
Am I missing something that is causing this valve to flow so slowly? Would it work better using a pump? Although it seems with non-self-priming pumps that the slow flow would just cause the pump to cavitate and not pump anything.