OP
OP
brewprint
Well-Known Member
- Joined
- May 7, 2014
- Messages
- 1,616
- Reaction score
- 169
Alright, I think I'll post again.
https://www.homebrewtalk.com/showthread.php?t=382286
The very top is the controller that I think that I need to build.
https://www.homebrewhedonist.com/budget-electric-brewing/
The above link has some good info where I can get the controller, temp sensor, and probe.
Bobby M if you have the basic stuff that I need here to get rolling that would be great. You don't happen to have a list already put together do you?
I'm thinking with a pump and all of the fittings I'm going to around $200. Another $250 for the panel and roughly $50 for the element. $100 for the 20 gallon kettle on Ebay. I'm not sure how much a false bottom would cost.
In total I'm going to be around $650-$700 or maybe $750 including the new bag from Wilser.
This set up is how I think I'm going to go.
Now if I could get a 5500 watt 220 volt with a pump, false bottom, enclosure and everything that I need already made I'll go that route.
https://www.homebrewtalk.com/showthread.php?t=382286
The very top is the controller that I think that I need to build.
https://www.homebrewhedonist.com/budget-electric-brewing/
The above link has some good info where I can get the controller, temp sensor, and probe.
Bobby M if you have the basic stuff that I need here to get rolling that would be great. You don't happen to have a list already put together do you?
I'm thinking with a pump and all of the fittings I'm going to around $200. Another $250 for the panel and roughly $50 for the element. $100 for the 20 gallon kettle on Ebay. I'm not sure how much a false bottom would cost.
In total I'm going to be around $650-$700 or maybe $750 including the new bag from Wilser.
This set up is how I think I'm going to go.
Now if I could get a 5500 watt 220 volt with a pump, false bottom, enclosure and everything that I need already made I'll go that route.
