Barley Crusher Rollers

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Beerthoven

Well-Known Member
Joined
May 4, 2007
Messages
2,173
Reaction score
40
Location
Cary, NC
When you turn the crank of your BC, empty, just the roller attached to the crank turns, right? The other one does not move?
 
Shortly after I got mine this little o-ring came loose from the non handle roller. From then on the non handle roller never moved with out grain. This was not uncommon from the comments of
 
Mine has an o-ring on the cranked roller which turns the idle roller. I'm 99% sure it said in the instructions supplied that the O-Ring doesn't need to be replaced if it breaks as the grain will turn the other roller when crushing.

I guess they just put it on in the factory check both rollers turn.

Edit - beat to it by Sweet_corn.
 
The o-ring is there for assembly, I cut mine off before using the mill so it wouldn't end up in my crush. The grains make the second roller spin. It is amazing how fast you can burn through 28# of grains with a drill on full speed, and awesome crush and efficiency.
 
Back
Top