Spoonchucker
New Member
- Joined
- Jun 19, 2018
- Messages
- 1
- Reaction score
- 2
Hi,
Great site - was able to gather information off the threads here and build a Keezer from scratch - went for a very simple approach:
Hisense 7.0 cu/ft freezer from Costco for $139.00
Twin Stainless tower with Perlick 630ss flow control faucets - $175.00
Two Sankey D couplers - $60.00
Inkbird itc-308 temperature controller - 29.00
Taprite 2 gauge regulator - $50.00
Two coupler elbows for clearance - $20
Got a CO2 tank for free and the hoses and clamps came with the tower and couplers
All in, just under $500 and you could knock $100 or so off with cheaper faucets.
The Freezer inside height is right around 27.5" - so two standard slim pony's or 3 sixers will fit but you need the elbows to keep from smashing the lines. 5lb CO2 tank sits on the compressor hump.
Super easy and clean.
Great site - was able to gather information off the threads here and build a Keezer from scratch - went for a very simple approach:
Hisense 7.0 cu/ft freezer from Costco for $139.00
Twin Stainless tower with Perlick 630ss flow control faucets - $175.00
Two Sankey D couplers - $60.00
Inkbird itc-308 temperature controller - 29.00
Taprite 2 gauge regulator - $50.00
Two coupler elbows for clearance - $20
Got a CO2 tank for free and the hoses and clamps came with the tower and couplers
All in, just under $500 and you could knock $100 or so off with cheaper faucets.
The Freezer inside height is right around 27.5" - so two standard slim pony's or 3 sixers will fit but you need the elbows to keep from smashing the lines. 5lb CO2 tank sits on the compressor hump.
Super easy and clean.
