California 5/16 silicone tubing

[milldoggy]

Would this fit over a standard tri clover barb, thinking it might be good for my transfers when I do not use a pressured transfer.
Edit, just looked, think my barbs are 1/2,

 

[Wulfman]

This is pretty flexible. Yes it will fit. Maybe clamp would help seal

 

[milldoggy]

Thanks wulfman, got the tubing. Looks very nice. Ordered a few 3/8 swivel adapeters, a cam to 1/4 ffl and will use this to pump into my conical 15 ft away

 

[Wulfman]

Thanks milldoggy, Cheers!

 

[Wulfman]

I have more if anyone interested

 

[gobrewsome]

Set me up for a roll and how to pay with paypal

 

[milldoggy]

Giving wulfman a bump. Finally got around to using this. Worked amazing. Got a cam to ffl from brewhardware. Used a 3/8 swivel adapter to this hose. Hooked my standard 1/2 hoses cam to ball valve to cam to ffl to this hose. Pumped 16 ft to my conical. Homerun. No more lifting 120lbs!

 

[gofer]

Sent im for a roll.

 

[gofer]

Quick shipping and great deal. I'm using the hose like milldoggy.

 

[Wulfman]

Thanks Guys! I Still have some left.

 

[milldoggy]

Some one asked me a while ago how I have it setup, sorry I never responded, life kids, work,

Ok here is what I have

3 way ball valve, male cam on one side, female on other side.

One of these, male cam to ffl. https://www.brewhardware.com/product_p/cammfl.htm

Ffl https://www.brewhardware.com/product_p/fflbarb38.htm

I hooked the valve at the end of my output hose of my CFC. During the boil, circ the boiling wort to sterilize. After boil, close valve on pot and on hose. So my output hose now ends in the valve. Hook up the cam to ffl and run hose to conical. I just drop it in the conical. Having the valve at the end of the hose allows me to control flow way after the pump, so I can ensure the CFC is full. Makes transfers a breeze. Next time I brew I can provide pics. Just can't find time, but as soon as the taps run dry the wife pushes for another brew.

 

[ITV]

I'm in for a 50' roll. Send me paypal info.

Thanks

 

[GreenMtnBrewer]

How much are your 50' rolls at this point? Of not that much left what is your 10' incrament price please?

 

[zazbnf]

Any of this left? I will take a roll if so. Send me paypal info as well.

Thanks,

 

[Wulfman]

Yes! I'll PM u

 

[Wulfman]

Still have some left. 40 delivered to US

 

[milldoggy]

Here is one way I am using it.

View attachment 1505475766462.jpg

View attachment 1505475783450.jpg

 

[sfguy650]

How much do you have left wulfman? I might be interested.

 

[Wulfman]

I have a frw hundred feet left. Let me know how many u need

 

[Wulfman]

Looks good! Thanks!

 

[ITV]

Here is one way I am using it.

I can't tell from your photos, are you pumping from the boil kettle to your fermenter?

What is the length of your tubing?

 

[milldoggy]

I can't tell from your photos, are you pumping from the boil kettle to your fermenter?

What is the length of your tubing?

Yes, bk to chugger to valve to 5/16 to conical. Around 14 ft. So much better than lifting my conical

 

[ITV]

Yes, bk to chugger to valve to 5/16 to conical. Around 14 ft. So much better than lifting my conical

Nice setup, thanks for sharing!

I am thinking of gravity feeding from my plate chiller to fermenter which is in the basement since I am tired of lifting fermenters of beer also.

 

[milldoggy]

Nice setup, thanks for sharing!

I am thinking of gravity feeding from my plate chiller to fermenter which is in the basement since I am tired of lifting fermenters of beer also.

Little better shot, conical is in the top left, over the mill

View attachment 1505657857895.jpg