3 keggles, fully assembled

[TomRep]

Thinking about selling my keggles to upgrade to bigger pots. All are stainless with 12" holes cut in the top. I have one aluminum lid for the mash tun. All fittings are brass. I am not including diptubes are my false bottom as I will need them for the new pots. The HLT has a copper coil in it set up for a HERMS setup. All pots also include sight glasses with themometers and return ports at the top for whirlpooling (the HLT does not have any fittings in the whirlpool hole, didnt get there yet). looking for $140 each for the boil kettle and mash tun, $160 for the HLT, or $400 for all three. Pick up only in southeast PA, no shipping.
Tom

 

[TomRep]

The stainless 3 piece valve and weldless setup I would like to keep. I have all the brass that was in that hole, so it will still have a valve to it.
tom

 

[Eco]

I am looking at the keggles, but I can't get over how beautiful your bench is. Did you make that? Nice craftsmanship!
Cheers,
M

 

[TomRep]

Yes I did, and thank you! Followed the plans from Kal's build at theelectricbrewery.com
Tom

 

[Navy_Chief]

May be interested do you have any pictures of the interiors? Specifically the HERMS coil and how the recirc fittings are done on the inside?

 

[TomRep]

I don't have any interior pictures with me at work. I will get some tonight for you. I would describe it to you but to be honest I forget how the heck I even did them myself.
tom

 

[TomRep]

Alright, the HERMS coil is held in with Sharkbite connectors. I did this for easy removal for cleaning or what have you. The "tube" I have set up not for the whirlpool fitting is just a piece of plastic tube I had sitting here. They are installed onto a 1/2 compression fitting using an o-ring, once again for easy removal. I was eventually going to replace the tubes with either copper or stainless tubes, just never got there.
tom

 

[Navy_Chief]

Is there any clearance under the herms coil for an electric element without it touching?

 

[KES]

Great deal, Tom. Maybe you should offer it up on kal's Buy/Sell section too.

 

[TomRep]

There is room under the coil for an element. I was going to use these for my Kal build, se I purposely left room there.
Tom

Sent from my DROIDX using Home Brew Talk

 

[Clintdowns]

I want one. Where are Yu located

 

[Clintdowns]

Sorry. Just seen no shipping. I really need one

 

[Navy_Chief]

Pm sent

 

[TomRep]

I believe these are sold. Pickup is set for next week. If it falls through, I will let you all know. Thanks!
tom

 

[TomRep]

These are officially sold. thanks Jeff!

 

[fpweeks]

Nuts.......