220v Plug

[Mcinwl55]

I am interested in getting a Digiboil 220v brew kettle. It came with an unusual plug, but would like to plug it into the dryer outlet. I found a cord I could buy to allow me to plug it in without dealing with changing wires. Would this be possible?

Below is the plug, followed by what my dryer outlet looks like, followed by the cord that I hope makes it possible.

 

[Jtvann]

The end of the adapter looks way too small for the size needed.

 

[Sammy86]

I believe this is what you are looking for

Parkworld 885415 NEMA Dryer 10-30P 30A to Welder 6-30R 30A Welding Adapter Cord 250V (6 Feet) https://www.amazon.com/dp/B07PZ5LDGS/ref=cm_sw_r_cp_api_glc_fabc_KoN6FbETJKFK2

 

[doug293cz]

I believe this is what you are looking for

Parkworld 885415 NEMA Dryer 10-30P 30A to Welder 6-30R 30A Welding Adapter Cord 250V (6 Feet) https://www.amazon.com/dp/B07PZ5LDGS/ref=cm_sw_r_cp_api_glc_fabc_KoN6FbETJKFK2

Bad link. This one works (I think.)

Brew on

 

[Sammy86]

Bad link. This one works (I think.)

Brew on

Thanks @doug293cz

 

[IslandLizard]

Holy Moses! For $70-some bucks it should sing arias!

Unless you want to keep the dryer outlet, you can replace the socket with a 6-30R for $10:
https://www.amazon.com/Leviton-5372-S00-Receptacle-Industrial-Grounding/dp/B01N1P9QV8

The end of the adapter looks way too small for the size needed.

Yup, that's only a 6-20R adapter cord. For 30A you'd need the larger receptacle.

 

[Toto's]

I ordered something from Australia and their plug was also not compatible with our 220V.
I simply cut the cord and put a US type. Any harware store will be able to help you.

 

[Samudell]

I bought a 3 prong dryer cord and replaced the original cord. Works fine

 

[Samudell]

I bought a 3 prong dryer cord and replaced the original cord. Works fine

I did have to drill the hole out a little