Massachusetts 20 Gallon Complete Brew System

[greenleaf]

Downsizing: This is what I have and the original prices I paid. I am not expecting even close to full price. Ultimately I would like to see the brewing setup go as a single unit and the kegging equipment go as a single unit. The Blichmann Conical and Kettles/Mash Tun go perfectly together and local pickup would be best. PM me an offer.

The pictures are not of everything, there are hoses, lids, and such that are included. The systems are complete. My ebay user id is mikegreenleafgarrison

Items in Red are sold

Brewing System Inventory
$1,043.99 27 Gallon Blichmann Fermenator F3-27 - Tri-Clamp Fittings
$124.99 F3-27 Blichmann Leg Extensions
$60.00 2 Electric Fermenter Heating Belts
$559.68 2 26 Gallon Kettle w/* Valve & Thermometer@ $279.99=$559.98
$369.99 1 26 Gallon Stainless Mash Tun* *@ $369.99 = $369.99
$24.99 1 36" Stainless Mash Paddle* *@ $24.99 = $24.99
$155.98 2 Low Profile Banjo Burner (burner and stand)
$149.99 March 809HS-PL Pump - 6 foot power cord and plug
$116.99 Monster Mill MM2 2-Roller Mill
$31.99 Monster Mill Hopper for MM-2. 11lb
$149.99 1 Chill-Out! 40 Plate Wort Chiller* *@ $149.99 = $149.99
$11.98 2 High Flow Quick Connect Plug x 1/2" MPT* *@ $5.99 = $11.98
$13.00 2 High Flow Quick Connect Plug x 1/2" FPT* *@ $6.50 = $13.00
$41.97 3 High Flow Quick Connect Socket x Barb* *@ $13.99 = $41.97
$13.00 2 High Flow Quick Connect Plug x 1/2" FPT @ $6.50= $13.00
$38.97 3 High Flow Quick Connect Socket x Barb @ $12.99 = $38.97
$11.98 2 High Flow Quick Connect Plug x 1/2" MPT @ $5.99 = $11.98
$23.60 8 Silicone Tube 1/2" @ $2.95 = $23.60
$27.99 1 1/2" 3 pc Sanitary Ball Valve* *@ $27.99 = $27.99
$36.99 1 Wort Aeration System* *@ $36.99 = $36.99
$24.00 16 1/2" ID Thermoplastic Tubing - per foot
$80.00 Johnson Digital Temp Controller 80.00
$40.00 Refractometer 40.00
$40.00 Small banjo burner 40.00


Kegging
$199.75 5 5 Gallon Ball Lock Keg* *@ $39.95 = $199.75
$450.00 Kegerator Complete with dual tower tap faucets, co2 tank & regulator, local pick up for $250/obo
$80.00 Nitro Regulator

 

[kevinb]

I am in Mass. Please send me photos of the kegging equipment.

 

[Lumpyyyyy]

How much for the pump? It is the polysulfone header? I'm not quite local but in MA. Also would be interested in Monster Mill.

 

[greenleaf]

How much for the pump? It is the polysulfone header? I'm not quite local but in MA. Also would be interested in Monster Mill.

Yes, it is polysulfone pump. Purchased from Northern Brewer. I will post pictures tonight.

 

[simpleman505]

Downsizing: This is what I have and the original prices I paid. I am not expecting even close to full price. Ultimately I would like to see the brewing setup go as a single unit and the kegging equipment go as a single unit. The Blichmann Conical and Kettles/Mash Tun go perfectly together and local pickup would be best. PM me an offer.

I will post pictures this weekend. My ebay user id is mikegreenleafgarrison

Brewing System Inventory
$1,043.99 27 Gallon Blichmann Fermenator F3-27 - Tri-Clamp Fittings
$124.99 F3-27 Blichmann Leg Extensions
$60.00 2 Electric Fermenter Heating Belts
$559.68 2 26 Gallon Kettle w/* Valve & Thermometer@ $279.99=$559.98
$369.99 1 26 Gallon Stainless Mash Tun* *@ $369.99 = $369.99
$24.99 1 36" Stainless Mash Paddle* *@ $24.99 = $24.99
$155.98 2 Low Profile Banjo Burner (burner and stand)
$149.99 March 809HS-PL Pump - 6 foot power cord and plug
$116.99 Monster Mill MM2 2-Roller Mill
$31.99 Monster Mill Hopper for MM-2. 11lb
$149.99 1 Chill-Out! 40 Plate Wort Chiller* *@ $149.99 = $149.99
$11.98 2 High Flow Quick Connect Plug x 1/2" MPT* *@ $5.99 = $11.98
$13.00 2 High Flow Quick Connect Plug x 1/2" FPT* *@ $6.50 = $13.00
$41.97 3 High Flow Quick Connect Socket x Barb* *@ $13.99 = $41.97
$13.00 2 High Flow Quick Connect Plug x 1/2" FPT @ $6.50= $13.00
$38.97 3 High Flow Quick Connect Socket x Barb @ $12.99 = $38.97
$11.98 2 High Flow Quick Connect Plug x 1/2" MPT @ $5.99 = $11.98
$23.60 8 Silicone Tube 1/2" @ $2.95 = $23.60
$27.99 1 1/2" 3 pc Sanitary Ball Valve* *@ $27.99 = $27.99
$36.99 1 Wort Aeration System* *@ $36.99 = $36.99
$24.00 16 1/2" ID Thermoplastic Tubing - per foot
$80.00 Johnson Digital Temp Controller 80.00
$40.00 Refractometer 40.00
$40.00 Small banjo burner 40.00


Kegging
$199.75 5 5 Gallon Ball Lock Keg* *@ $39.95 = $199.75
$450.00 Kegerator Complete with dual tower tap faucets, co2 tank & regulator, local pick up for $250/obo
$80.00 Nitro Regulator

Is the Kegging set up still available ?

 

[simpleman505]

Is the kegging equip. still available ? Very interested

 

[BraveNewBeer]

Interested in the full brewing if the price is right. Where in MA? Looking forward to seeing the pics. Looked for your user on ebay without luck, would appreciate a link if you have already post pics there. Thanks in advance.

 

[greenleaf]

Here are the rest of the photos. I can take more specific ones if you request them. The price will be right if someone wants to take the whole lot. Please note the Nitro Tank is not included…unless you want it. I was going to take it back to the gas supply place tomorrow. It is full and it is Guinness Gas, properly mixed by Corp. Brothers.

Please PM me with your email address and offers. Thank you!

My ebay ID is here:http://www.ebay.com/sch/member/?_fr...&_tokentext=463183&tokenstring=gEl4lgkAAAA%3D

 

[greenleaf]

Kegging Equipment is still available. I am awaiting 2 offers to buy the entire lot. More photos

 

[babski]

I'm interested in the kegerator if its still available, PM me please.


Sent from my iPhone using Home Brew

 

[greenleaf]

Kegerator, co2 tank w/ regulator is sold. Kegs and everything else is available

 

[brewguyver]

price/condition of the two fermwrap heaters?


Sent from my iPad using Home Brew

 

[cease]

Interested in the mill and aeration system. Will you ship to CA? I'll pick up the shipping of course.


Sent from my iPhone using Home Brew

 

[greenleaf]

price/condition of the two fermwrap heaters?


Sent from my iPad using Home Brew

Fermwrap heaters are in great shape and work perfectly. There is a little duct tape residue on parts of the edges where I attached them to the conical, but will easily come off with rubbing alcohol. Price is $37 for both including shipping.

 

[greenleaf]

Interested in the mill and aeration system. Will you ship to CA? I'll pick up the shipping of course.


Sent from my iPhone using Home Brew

PM sent

 

[Lumpyyyyy]

Interested in the mill and hopper. PM me if you can.

 

[cease]

Mill and hopper have been sold to yours truly 😄


Sent from my iPhone using Home Brew

 

[greenleaf]

Cease beat me to it...Mill and Hoppper are sold.

 

[greenleaf]

Kegs, aerator, and refractometer are sold.

 

[eatmorefrogs]

What's the lowest you'd go on that conical fermenter? (local pickup, cash) You can take the discussion to PM if you prefer.

 

[BeerGrylls]

I wonder about the Nitro regulator. Do you have a tank or stout tap with it? I'm on the North shore, so pickup is feasible however it's still a couple hours away.

 

[greenleaf]

I have a 20 Cu Ft. full tank, Guinness gas, properly mixed by Corp Brothers. They are inspected by Guinness to make sure the mixture is correct. The tank and regulator are in the pictures, next to the fridge and kegs, its the black one, its kind of hidden, I can take more pictures of it if you want, I only used it a handful of times. The tank with fill was $116.98, the regulator was $80.00. If you wanted to come pick it up, I would let the pair go for $100.00

 

[greenleaf]

Everything but the nitro regulator and tank has been sold