goneskiing
Member
- Joined
- Apr 13, 2015
- Messages
- 12
- Reaction score
- 2
Now Sold
This is a 3 vessel, 50 gallon home brew system set up for natural gas. I have brewed on it probably 6 or 8 times in the 7 years I've had it, but life dictates that I don't have the time to use it, or the occasion to brew that much beer anymore. This is located in Crested Butte, CO. When I purchased it, I was able to fit everything in a full size 6ft pickup, but you might need a bit more room as I added a fermenter. $2,500.
Includes:
3x stainless 50 gallon kettles with lids
-HLT with triclamp outlet
-MLT with thermometer, triclamp outlet, and false bottom
-Kettle with 2 triclamps set up to whirlpool
7 ft X 2 ft welded steel frame with 3 natural gas burners. HLT and kettle burners are on ball valves, mash tun is on a solenoid valve with piezo ignitor for use with the controller.
2 pumps mounted to frame
Blichmann therminator plate chiller
1x 27 gallon conical fermenter
1x 40 gallon STOUT conical fermenter
Older glycol chiller. I have a homemade copper coil that I wrapped around the larger fermenter, and I was able to crash to about 40°F. The smaller fermenter has a stainless glycol coil that goes through the lid. Neither tank is insulated.
Sparge arm for MLT
3 half kegs
20lb CO2 cylinder
All hoses, valves, gaskets, and fittings needed
This is a 3 vessel, 50 gallon home brew system set up for natural gas. I have brewed on it probably 6 or 8 times in the 7 years I've had it, but life dictates that I don't have the time to use it, or the occasion to brew that much beer anymore. This is located in Crested Butte, CO. When I purchased it, I was able to fit everything in a full size 6ft pickup, but you might need a bit more room as I added a fermenter. $2,500.
Includes:
3x stainless 50 gallon kettles with lids
-HLT with triclamp outlet
-MLT with thermometer, triclamp outlet, and false bottom
-Kettle with 2 triclamps set up to whirlpool
7 ft X 2 ft welded steel frame with 3 natural gas burners. HLT and kettle burners are on ball valves, mash tun is on a solenoid valve with piezo ignitor for use with the controller.
2 pumps mounted to frame
Blichmann therminator plate chiller
1x 27 gallon conical fermenter
1x 40 gallon STOUT conical fermenter
Older glycol chiller. I have a homemade copper coil that I wrapped around the larger fermenter, and I was able to crash to about 40°F. The smaller fermenter has a stainless glycol coil that goes through the lid. Neither tank is insulated.
Sparge arm for MLT
3 half kegs
20lb CO2 cylinder
All hoses, valves, gaskets, and fittings needed
Last edited: