Hoosierbilly
Well-Known Member
I am selling my 1BBL turn key brewery. I down graded from 2bbl to 1bbl but I find it sits around more than it is brewed on. I have brewed maybe 10 batches with this setup. Not my first set of stainless vessels, very well cared for. No dents, nicks, scratches, or discoloration. Cleaned with BKF and stored inside. I get efficiency in the 80's. I find myself doing more smaller batches and would like to see this put to use in a brewery where it belongs. Before this I had a 2bbl gas fired setup that I ended up selling to a brewery in Detroit. This includes every single part and piece needed to brew. Uses a 50 amp 4-prong outlet. The control panel is the electric brewery 50amp control panel for 30+ gallons that was pre-asymbled by them, with their control panel power cord.
https://shop.theelectricbrewery.com...ry-control-panel-for-30-gallons-pre-assembled
https://shop.theelectricbrewery.com...ts/control-panel-power-cord-50a-pre-assembled
The vessels are stout tanks:
40gal HLT
https://conical-fermenter.com/40-Gallon-Hot-Liquor-Tank-sight-glass-HERMS-Coil.html
40gal MT and 12" sparge arm
https://conical-fermenter.com/1-bbl-Mash-Tun-486.html
45gal BK
https://conical-fermenter.com/45-Ga...et-Sight-Glass-Electrical-Ports-and-legs.html
The control panel connects to 4 5500w all stainless elements (two in HLT and two in BK) with grounded TC connections. Two twist lock cords go to power the two DC pumps.
https://www.brewhardware.com/product_p/element5500.htm
https://www.brewhardware.com/product_p/etc3.htm
https://www.northernbrewer.com/collections/pumps/products/the-steelhead-2-pump
Each vessel has a TC temp sensor with color coded cables to the control panel (Red for mash, white for water, blue for boil.)
https://shop.theelectricbrewery.com...p-tri-clamp-1-5-flange-1-38-35mm-probe-length
https://shop.theelectricbrewery.com...roducts/temperature-probe-cable-pre-assembled
For recirculating, whirlpooing, and cooling in the BK is a march nanobrewery pump and chillzilla.
https://woodyshomebrew.com/products...MIgefMgcOv3QIVg7rACh0C4AUCEAQYAyABEgJQUvD_BwE
http://shop.greatfermentations.com/product/chillzilla/wort-chillers
SSbrewtech 1bbl chronical brewmaster edition with cooling coil and neoprene sleeve
https://www.ssbrewtech.com/collections/chronicle-bme/products/chronical-one-barrel-fermenter
Included is all silicone hoses, hose clamps, triclamps, gaskets, and any and all fittings needed for brewing. No plastic or pvc touches the wort, only stainless and silicone.
I have well over $10,000 in everything. Asking $8,000 firm. Located in central IN, local pickup only. Cheers!
https://shop.theelectricbrewery.com...ry-control-panel-for-30-gallons-pre-assembled
https://shop.theelectricbrewery.com...ts/control-panel-power-cord-50a-pre-assembled
The vessels are stout tanks:
40gal HLT
https://conical-fermenter.com/40-Gallon-Hot-Liquor-Tank-sight-glass-HERMS-Coil.html
40gal MT and 12" sparge arm
https://conical-fermenter.com/1-bbl-Mash-Tun-486.html
45gal BK
https://conical-fermenter.com/45-Ga...et-Sight-Glass-Electrical-Ports-and-legs.html
The control panel connects to 4 5500w all stainless elements (two in HLT and two in BK) with grounded TC connections. Two twist lock cords go to power the two DC pumps.
https://www.brewhardware.com/product_p/element5500.htm
https://www.brewhardware.com/product_p/etc3.htm
https://www.northernbrewer.com/collections/pumps/products/the-steelhead-2-pump
Each vessel has a TC temp sensor with color coded cables to the control panel (Red for mash, white for water, blue for boil.)
https://shop.theelectricbrewery.com...p-tri-clamp-1-5-flange-1-38-35mm-probe-length
https://shop.theelectricbrewery.com...roducts/temperature-probe-cable-pre-assembled
For recirculating, whirlpooing, and cooling in the BK is a march nanobrewery pump and chillzilla.
https://woodyshomebrew.com/products...MIgefMgcOv3QIVg7rACh0C4AUCEAQYAyABEgJQUvD_BwE
http://shop.greatfermentations.com/product/chillzilla/wort-chillers
SSbrewtech 1bbl chronical brewmaster edition with cooling coil and neoprene sleeve
https://www.ssbrewtech.com/collections/chronicle-bme/products/chronical-one-barrel-fermenter
Included is all silicone hoses, hose clamps, triclamps, gaskets, and any and all fittings needed for brewing. No plastic or pvc touches the wort, only stainless and silicone.
I have well over $10,000 in everything. Asking $8,000 firm. Located in central IN, local pickup only. Cheers!
Attachments
Last edited: