Recent content by brett1341

Is anyone aware of any companies that make stainless steel air locks?

I ordered 3/16 ID vinyl and tubing and had it delivered yesterday. I failed to see that it was 5/16 OD instead of 7/16. Are there any issues with using the thin wall tubing for my beer/soda lines. All of the homebrew stores I see sell the thick wall tubing exclusively.

Applied about 30 PSI to seat the lid, purged, let it sit. I've checked the pressure relief valve and it was still under pressure. Once the valve is closed I can hear the CO2 flowing in.

I have a Vienna lager in my keezer right now. It is totally flat. I've had it under pressure for 1.5 months now. I subscribe to the set and forget method. So 1.5 months ago, I set my temperature to 40 degrees and the PSI on my regulator to 14, shooting for just north of 2.5 volumes. After two...

In Sent from my iPhone using Home Brew

I apologize if this has been addressed before, but I couldn't find the answers I was looking for using the search function on the app or using google. So, I am building an e-Herms and I am in the last phase of putting it together. I have two 120v, 2000w heat sticks that I will be using to...

If you aren't already, use ifttt (if this then that) on the App Store. You can save searches from CL and when something is posted that falls within your custom search, it will automatically e-mail you with a link to the ad. Sent from my iPhone using Home Brew

Another noob diving in to electric brewing, so forgive my ignorance. Am I correct in assuming that with the below heating element (5500w 240v) that a 10 gauge electrical cord (10 ft at most) will be required and a 30amp dedicated circuit for each element? I have plenty of room for the...

Any thoughts on using this to control the water temperature in my HLT using a Camco 5500w ULW heating element for an eHERMS build? http://m.rakuten.com/product/230517930?listingid=213429172&adid=18172 Sent from my iPhone using Home Brew

I was thinking of using it (maybe 2 of them) in my HLT for an eherms build with it plugged into a Ranco temperature controller. Sent from my iPhone using Home Brew

Does anyone use this for electric brewing instead if a heat stick or weldless heater element? http://www.amazon.com/gp/product/B000BDB4UG/?tag=skimlinks_replacement-20 Sent from my iPhone using Home Brew

I am just starting to piece together parts and tools for an electric build. Everything I've looked at makes me think I'll be needing to put a 1 1/4" hole in my pots. Kal recommends the greenlee knockout punches, but would these from harbor freight work as well for a fraction of the cost...

Thanks. Sent from my iPhone using Home Brew

? Sent from my iPhone using Home Brew

Does anyone in the Seattle area have a Greenlee 1 1/4" standard knockout punch that you would be willing to let me borrow for a day or two? I'm trying to convert my HLT and boil kettle to electric using the kit from theelectricbrewery.com Thanks for looking and let me know if you'd be willing...