Tube size to fit on a tap to pour into growlers.

[BrewatDrews]

I want to buy some tubing to put on the end of my tap so that I can better pour beer into growlers. What size tube would I need?

 

[Misplaced_Canuck]

3/8" ID fits inside my taps and works pretty well.

M_C

 

[iaefebs]

I use ½" ID Silicone tube with my Perlick 425. I put it on the outside of the faucet.

 

[chemman14]

I used a 1/2 to fill my growler but 3/8 is the right size. The 1/2 was a bit too large for my picnic tap so i had to keep it at an angle to keep the tube filled

 

[RJSkypala]

I use ½" ID Silicone tube with my Perlick 425. I put it on the outside of the faucet.

Have you any experience using this tube to do any pseudo counter-pressure filling methods such as BMBF?

 

[iaefebs]

Have you any experience using this tube to do any pseudo counter-pressure filling methods such as BMBF?

I use the hose on the faucet for growler fills. I have a version of the BMBF for long term bottle fills.

 

[malkore]

I jam the bottle filling wand into the picnic tap, and fill.