dirtypirate23
Member
- Joined
- Sep 22, 2012
- Messages
- 17
- Reaction score
- 0
Hello fellow brewers. My wife finaly gave me the go ahead to build my three tiered brew system. I have brewed numerous times in the past so i'm not worried bout that, my concern is building the system from scratch. I have done my research and have seen what some have built. My first set up is not going to be my "dream" set up nor have everything at once to save money at first. So here starts my questions.
1) I know i'm going to use 2x4 and 2x6 but will a length of 6 ft be to large?
2) I noticed partical board is a little cheaper than plywood will it hold enough weight?
Before answer let me back up a little. The design in my head will be about 6 feet long...4 inches off ground (on casters so easy to move) and have shelves to hold kettles.
1) I know i'm going to use 2x4 and 2x6 but will a length of 6 ft be to large?
2) I noticed partical board is a little cheaper than plywood will it hold enough weight?
Before answer let me back up a little. The design in my head will be about 6 feet long...4 inches off ground (on casters so easy to move) and have shelves to hold kettles.