nicolas_james
Active Member
All prices OBO. Also listed on CL. I could ship the little sanke rack and oxygenation kit, but not the rest.
- $550 - 7 gallon SS Brewtech Chronical w/ older 1 stage temp controller.
-I bought this close to when they came out, no heating pad at the time. Will need new gaskets/o-rings and a good clean. All valves need disassembled and deep cleaned. I made brett/wild beers in this. Comes with some extra fittings:
-Butterfly valve to replace bottom ball (original included)
-Gas triclover for pressure transfers
-Male NPT/hose barb. I can get measurements.
-Female NPT/hose barb. Buy your own triclover/male NPT fitting for a large blow off valve.
-Triclover sample valve
- $150 - Blichmann Floor burner with leg extensions and natural gas conversion kit. Has been boiled over on, has light rust/oxidation from garage storage. Works well though.
- $60 - XL Wort Chiller
- $30 - Oxygenation Kit - May need a new stone, up to your cleaning abilities. Cleaned well, but unused forever.
- $50 - Stainless pressure racking setup for fermenting in Sanke kegs. Triclover/male NPT needed to finish.
- $550 - 7 gallon SS Brewtech Chronical w/ older 1 stage temp controller.
-I bought this close to when they came out, no heating pad at the time. Will need new gaskets/o-rings and a good clean. All valves need disassembled and deep cleaned. I made brett/wild beers in this. Comes with some extra fittings:
-Butterfly valve to replace bottom ball (original included)
-Gas triclover for pressure transfers
-Male NPT/hose barb. I can get measurements.
-Female NPT/hose barb. Buy your own triclover/male NPT fitting for a large blow off valve.
-Triclover sample valve
- $150 - Blichmann Floor burner with leg extensions and natural gas conversion kit. Has been boiled over on, has light rust/oxidation from garage storage. Works well though.
- $60 - XL Wort Chiller
- $30 - Oxygenation Kit - May need a new stone, up to your cleaning abilities. Cleaned well, but unused forever.
- $50 - Stainless pressure racking setup for fermenting in Sanke kegs. Triclover/male NPT needed to finish.
Attachments
-
3A404740-A3B0-4A58-9DD8-B554E4CF327E.jpeg3.7 MB · Views: 66
-
410CCC41-9A2D-4B01-A2F0-B9B175C2374C.jpeg3.1 MB · Views: 57
-
2521EFFF-7378-489F-9608-22A186343994.jpeg3.8 MB · Views: 48
-
23F7D9C2-CADA-4D5A-8FCD-825EAD1FADD3.jpeg1.8 MB · Views: 43
-
A4C5CFE2-F73F-4EB7-B9F5-53886778382C.jpeg2 MB · Views: 38