- Joined
- Mar 9, 2013
- Messages
- 75
- Reaction score
- 3
I used this slightly unfinished Son of Fermentation Chiller for a couple batches and it worked really well. I'm sure it will work even better finished! I have (included) the dowels and molding needed to finish it - easy enough. I have a Chronical with FTSs now, so just don't need this. See the build plans in the link below for info on the molding and dowels (not my plans, I just followed them). Like I said, it works well as it is now.
$25 UPDATE: Now FREE!
Pick up only. 03304
PM me.
I used these instructions to build it:
http://www.wortomatic.com/articles/Remote-Sensing-DIY-Controller-for-Less-Than-$25
The only modification was using a digital thermostat as described here:
http://www.wortomatic.com/articles/Remote-Sensing-DIY-Controller-for-Less-Than-$25
I used the expensive extruded polystyrene, not the cheap pink/blue stuff. From memory, I think I paid at least $40 for the foam board.
Fermenter NOT included.
$25 UPDATE: Now FREE!
Pick up only. 03304
PM me.
I used these instructions to build it:
http://www.wortomatic.com/articles/Remote-Sensing-DIY-Controller-for-Less-Than-$25
The only modification was using a digital thermostat as described here:
http://www.wortomatic.com/articles/Remote-Sensing-DIY-Controller-for-Less-Than-$25
I used the expensive extruded polystyrene, not the cheap pink/blue stuff. From memory, I think I paid at least $40 for the foam board.
Fermenter NOT included.
![speidel-30l-in-son-of-fermentation-chiller-60585.jpg](http://cdn.homebrewtalk.com/images/1/5/2/0/2/0/speidel-30l-in-son-of-fermentation-chiller-60585.jpg)
![Son of Fermentation Chiller.jpg Son of Fermentation Chiller.jpg](https://cdn.homebrewtalk.com/data/attach/271/271136-Son-of-Fermentation-Chiller.jpg)
![Inside 1.jpg Inside 1.jpg](https://cdn.homebrewtalk.com/data/attach/271/271137-Inside-1.jpg)
![Inside 2.jpg Inside 2.jpg](https://cdn.homebrewtalk.com/data/attach/271/271138-Inside-2.jpg)
![Inside 3.jpg Inside 3.jpg](https://cdn.homebrewtalk.com/data/attach/271/271139-Inside-3.jpg)
Last edited: