For Sale [SOLD] NY - Unibrau V3 (110v x 2) + many extras

[DevilsCups]

Another lower price braj's. This is a stupid deal lol. Almost irresponsible!

Time to sell the entire setup to move onto something new! I absolutely adore this setup, and it's always done me well. I brew in an apartment kitchen, and this setup gave me the flexibility to brew all different styles. The cooler is used when I wanted to make a bigger no-sparge beer. I would use the Unibrau to heat the strike water, send it into the cooler to mash with the bag, then transfer back into the Unibrau when ready to boil.

The Unibrau V3 from the original Kickstarter. It is 110v with the additional 1600w element kit (one element plugs directly into a separate 110v circuit to make an effective 3200w of boil power). Everything is included....all tri-clamps, gaskets, pump, plate chiller etc. I've done a few add-ons to the system :

- Had Bobby at BrewHardware add a top 1.5" tri-clamp port to the kettle, in case you want to use a SteamSlayer or tri-clamp compatible whirlpool option (neither included). Comes with the blockoff for when mashing/boiling.
- 2 different sized hop-spider baskets. Medium and massive.
- Tri-clamp Spin-Cycle Overboard from BrewHardware. This thing is excellent and makes whirlpooling a breeze.
- Press-in dip-tube for the kettle.
- I purchased an SS Brewtech lid for the kettle, since Brau Supply does not include one. Fits as it should.

The cooler is a Coleman Extreme 13gal with a BrewHardware 2 piece ball valve installed. It is lined with a BrewBag made for the dimensions of the cooler, and I use bungees to hold it in place just in case.

Photos of everything attached, and a link below in case it doesn't work.

Asking $650 for the whole setup, local pickup obviously highly preferred in this case. Located in Westchester County, NY. If you're looking for a 110v setup with flexibility, this has been great for me.

I'm very meticulous, and everything has been well-cared for and treated very kindly. Feel free to ask any questions here or in a PM! I'm okay with meeting at a designated police station exchange if you prefer (for confidence!).

Link to photos in case of anyone has issues viewing them above!

 

[DevilsCups]

My word it’s gotta go haha. Offer up!

 

[DevilsCups]

Looking to get this moving asap. Make an offer!

 

[dawsh2]

Can you ship? I don’t want the cooler. Where is the port for the second element?

 

[DevilsCups]

Hi there! Not totally opposed to it, but it's obviously fairly large and heavy to package and ship.

The second element also goes into the kettle, and the second element kit from Unibrau relocates the temp sensor into a tri-clamp tee off the pump, like this :

The Unibrau has three ports on the bottom of the kettle. One for the pump, one for an element, and another for either a second element or a temp sensor. However, since it's all tri-clamp and modular, you can set it up however you'd like. The kettle is also tri-clad, so it's induction ready as well if that's more someones flavor.

 

[dawsh2]

Glad to see it’s still available. If shipping works then we can definitely figure it out, this is exactly what I’ve been looking for down to all the accessories and modifications included.

IME UPS is usually the cheapest for large packages. May I ask why you’re selling?

 

[DevilsCups]

Sure thing! Let me fish around to see what exactly would be involved with shipping first and I’ll touch base.

Selling for a few reasons. Bought an apartment and moved with my wife and trying to lower my closet footprint a little bit lol. That, and wanting a touch extra capacity if I’m losing the cooler, I picked up a Brewtools setup. I used to brew a few different ways in my old apartment (Unibrau with elements, Unibrau with 240v induction, Unibrau with a cooler mash) and making the amount of space I take up smaller is nice to do. If I had a garage I’d keep building off the Unibrau.

 

[dawsh2]

Sure thing! Let me fish around to see what exactly would be involved with shipping first and I’ll touch base.

Selling for a few reasons. Bought an apartment and moved with my wife and trying to lower my closet footprint a little bit lol. That, and wanting a touch extra capacity if I’m losing the cooler, I picked up a Brewtools setup. I used to brew a few different ways in my old apartment (Unibrau with elements, Unibrau with 240v induction, Unibrau with a cooler mash) and making the amount of space I take up smaller is nice to do. If I had a garage I’d keep building off the Unibrau.

Cool! I’m also trying to go for a smaller footprint and easier overall process too personally. I think this and a conical to brew higher gravity batches (like seen in the Unibrau Pro system) will be perfect for me. Let me know what you come up with for shipping!

 

[DevilsCups]

Cool! I’m also trying to go for a smaller footprint and easier overall process too personally. I think this and a conical to brew higher gravity batches (like seen in the Unibrau Pro system) will be perfect for me. Let me know what you come up with for shipping!

Sure thing. Just shoot me an address in a PM if you'd like. I'll try to get an estimation of weight / packaging and cost. I have my Brewtools boxes so might be able to use that in some capacity.

 

[dawsh2]

Would you mind PMing me? I’m unsure how to do so ATM.

 

[DevilsCups]

Will do

 

[DevilsCups]

This is buttoned up fellas.