Single output co2 regulator to dual?

[Geneticjim]

Hello.
I have a single low pressure output regulator. I also have a 2 manifold gas line. I am looking to add another low pressure gauge and output. Is that possible? I don't want to have to buy a entire new regulator. I have this one..

http://www.homebrewing.org/Taprite-T-Knob-Dual-Gauge-Regulator_p_5876.html

 

[porterpounder]

If you're looking to add another gauge then yes, you will need to add a regulator body such as this: http://www.beveragefactory.com/draf...gco-LHC-96-S1-single-secondary-regulator.html

But if you do not need 2 different pressures, then just add a brass Y and a second valve to the body you have.

 

[augiedoggy]

if your looking to have two different pressure settings then you need 2 regulators to adjust them... the second guage will just show the same pressure as the other if you add it without another regulator.
now its completely possibly to connect the second regulator directly to the manifold or even better an existing extra plugged high pressure port (or where the larger full/empty gauge is on your regulator) on the first regulator so they both run off the same tank. you only need one of the larger 2000psi gauges so use that one one the new regulator.