kelogs
Member
- Joined
- Nov 4, 2018
- Messages
- 16
- Reaction score
- 1
Hello,
I left it a couple months ago on around 2 bar; couple of days ago pressure was 1.2 bar inside the keg and 0 inside the cylinder. I have also noticed cylinder spigot mostly tripping; when pressed down a bit it would feel normal again in its rotation motions. This is a ~ 10 kg (22 lb) cylinder only used with 6-7 kegs of 50 l (13 gal). I think there is a slow-ish leak between regulator keg line output and final cider tap somewhere which has drained that huge cylinder over two months ? Is the cylinder's spigot behaviour normal when empty or is that a suspect as well ?
I left it a couple months ago on around 2 bar; couple of days ago pressure was 1.2 bar inside the keg and 0 inside the cylinder. I have also noticed cylinder spigot mostly tripping; when pressed down a bit it would feel normal again in its rotation motions. This is a ~ 10 kg (22 lb) cylinder only used with 6-7 kegs of 50 l (13 gal). I think there is a slow-ish leak between regulator keg line output and final cider tap somewhere which has drained that huge cylinder over two months ? Is the cylinder's spigot behaviour normal when empty or is that a suspect as well ?